Falcore - Page 5

Force13b · 03-23-2011, 01:11 PM

Quote:

Originally Posted by TitaniumTT

Cool shit Tyler. No need fofr more bracketry pics, that one gave me plenty of ideas. So listen, are you going to drive down to Palm Springs or am I going to have to beat you like a red headed step child, tie you up like a 5'0 100lb blonde, throw you in the back of your FD like a pedobear victim and drive you down here yourself?

You pick the worst times to come out here. Rainy, cold and i have 0 free time.

***TitaniumTT*** · 03-23-2011, 02:55 PM

Dude, it's cali, it's always rainy and cold here. I don't care what you say, i know about your conspiracy to keep tourism up. The weather here sucks, there's no other explanation. I've been here in Jan, Feb, , March, soon April, May, Jun, July, Aug, Sept and Dec, and it ALWAYS RAINS.... you're like Seatles elitist bitch younger brother.

Force13b · 04-22-2011, 12:09 PM

Haven't been keeping this up to date. But this is how my garage looks right now

Helping a friend with his rats nest and finding all kinds of shit that needs to be fixed/replaced and OMG is this thing nasty. Pleas see caked on shit around turbo never mind the JB weld FAIL

***TitaniumTT*** · 04-23-2011, 08:34 AM

But but but but.... JB weld fixes EVERYTHING! hell, the great HC says you can use JB weld to plug holes in the TB!!

Force13b · 04-25-2011, 11:06 AM

Quote:

Originally Posted by TitaniumTT

But but but but.... JB weld fixes EVERYTHING! hell, the great HC says you can use JB weld to plug holes in the TB!!

i just read that shit. There was so much nasty built up on the elbow you couldn't see the JB weld. I barlly touched the vac line and it snapped off.

I need to post pics up of his exhaust someone used red gasket sealer, you know the shit you get from autozone

speedjunkie · 04-25-2011, 02:36 PM

Wait, they used the gasket sealer instead of an exhaust gasket, or in addition to?

I fixed my inlet pipe nipple several years ago with JB Weld but mine held haha, never had any problems with it. It was the same nipple on the same pipe too haha.

Force13b · 04-25-2011, 03:43 PM

Quote:

Originally Posted by speedjunkie

Wait, they used the gasket sealer instead of an exhaust gasket, or in addition to?

I fixed my inlet pipe nipple several years ago with JB Weld but mine held haha, never had any problems with it. It was the same nipple on the same pipe too haha.

There seems to be an exhaust gasket in there but also a butt load of gasket sealer oozing out of it. I'm planning on pulling it tonight i'll take lots of pics.

I cleaned the pipe off and did the "Is that JB weld *poke*" and the nipple fell off. I found another 1 for 20$

speedjunkie · 04-25-2011, 08:32 PM

Why would anyone even use gasket sealant on the exhaust anyway? LOL I mean, I guess if it's leaking...but then that would be time for a new gasket I believe? I'm just spitballing here haha.

Actually now that I think about it, we used a brass nipple and threaded it down into the plastic and then JB Welded to make sure it sealed, so I can't give JB all the credit haha.

And I think the technical term for that "poke" is "poke of disbelief" LOL.

Force13b · 04-26-2011, 02:35 PM

Quote:

Originally Posted by speedjunkie

Why would anyone even use gasket sealant on the exhaust anyway? LOL I mean, I guess if it's leaking...but then that would be time for a new gasket I believe? I'm just spitballing here haha.

I have no idea. When his car gets up to temp it smells like burnt popcorn coming out of the tail pipe.

Quote:

Actually now that I think about it, we used a brass nipple and threaded it down into the plastic and then JB Welded to make sure it sealed, so I can't give JB all the credit haha.

That's a bit different but a good idea, would have been cheaper then 20$ for a new pipe.

Quote:

And I think the technical term for that "poke" is "poke of disbelief" LOL.

Noted in my technical term dictionary.

speedjunkie · 04-26-2011, 03:46 PM

Quote:

Originally Posted by Force13b

I have no idea. When his car gets up to temp it smells like burnt popcorn coming out of the tail pipe.

Now see, I would just get hungry all the time smelling that haha.

Quote:

That's a bit different but a good idea, would have been cheaper then 20$ for a new pipe.

Yeah it was nice not having to buy and wait for one to ship too.

Force13b · 04-29-2011, 12:13 PM

More funny shit from my friends Jason's car so this lug nut was holding the DP to the cat

yes lug nut

Gasket maker on the DP to cat

I was hopping to find were the "burnt popcorn" smell was coming from but couldn't really find anything definitive

We pulled his stereo since we are installing a Defi Din gauges

Anyways look what we found, you know he wondered why his antenna didn't work rofl

Yes that's a standard wood screw, screwed into the antenna port. This is the wire that should be for the antenna

Now see the screw and the black wire behind that you see a metal taping screw, yeah it grounds out right there

And another rats nest of wires

tweiss3 · 04-29-2011, 01:51 PM

hey, that kinda looks like what my stocker looked like when i pulled it. Grabbed the power wires and antenna wires, and reran everything new.

speedjunkie · 05-01-2011, 01:56 AM

Wow...I don't even know what to say man. He should shoot whoever he bought the car from. Just wow.

Force13b · 05-02-2011, 12:14 PM

I was thinking this would be a short project but bit by bit it's getting longer and longer. We'll see what we find around the next corner.

Force13b · 05-04-2011, 11:56 AM

Can has door light.

03-23-2011, 02:55 PM	#2
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Dude, it's cali, it's always rainy and cold here. I don't care what you say, i know about your conspiracy to keep tourism up. The weather here sucks, there's no other explanation. I've been here in Jan, Feb, , March, soon April, May, Jun, July, Aug, Sept and Dec, and it ALWAYS RAINS.... you're like Seatles elitist bitch younger brother. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-23-2011, 08:34 AM	#4
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	But but but but.... JB weld fixes EVERYTHING! hell, the great HC says you can use JB weld to plug holes in the TB!! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

04-29-2011, 01:51 PM	#12
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio Posts: 319 Rep Power: 16	hey, that kinda looks like what my stocker looked like when i pulled it. Grabbed the power wires and antenna wires, and reran everything new. __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

04-22-2011, 12:09 PM	#3
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 Posts: 315 Rep Power: 16	Haven't been keeping this up to date. But this is how my garage looks right now Helping a friend with his rats nest and finding all kinds of shit that needs to be fixed/replaced and OMG is this thing nasty. Pleas see caked on shit around turbo never mind the JB weld FAIL

04-25-2011, 02:36 PM	#6
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Wait, they used the gasket sealer instead of an exhaust gasket, or in addition to? I fixed my inlet pipe nipple several years ago with JB Weld but mine held haha, never had any problems with it. It was the same nipple on the same pipe too haha.

04-25-2011, 08:32 PM	#8
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Why would anyone even use gasket sealant on the exhaust anyway? LOL I mean, I guess if it's leaking...but then that would be time for a new gasket I believe? I'm just spitballing here haha. Actually now that I think about it, we used a brass nipple and threaded it down into the plastic and then JB Welded to make sure it sealed, so I can't give JB all the credit haha. And I think the technical term for that "poke" is "poke of disbelief" LOL.

04-29-2011, 12:13 PM	#11
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 Posts: 315 Rep Power: 16	More funny shit from my friends Jason's car so this lug nut was holding the DP to the cat yes lug nut Gasket maker on the DP to cat I was hopping to find were the "burnt popcorn" smell was coming from but couldn't really find anything definitive We pulled his stereo since we are installing a Defi Din gauges Anyways look what we found, you know he wondered why his antenna didn't work rofl Yes that's a standard wood screw, screwed into the antenna port. This is the wire that should be for the antenna Now see the screw and the black wire behind that you see a metal taping screw, yeah it grounds out right there And another rats nest of wires

05-01-2011, 01:56 AM	#13
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Wow...I don't even know what to say man. He should shoot whoever he bought the car from. Just wow.

05-02-2011, 12:14 PM	#14
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 Posts: 315 Rep Power: 16	I was thinking this would be a short project but bit by bit it's getting longer and longer. We'll see what we find around the next corner.

05-04-2011, 11:56 AM	#15
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 Posts: 315 Rep Power: 16	Can has door light.