Digi Dash Mount Fab - Page 7

vex · 03-14-2011, 03:40 PM

I don't have any pictures worth showing. The buttons are listed on page 3 or 4, but they are tits nice. The body is stainless steel and the voltage restrictions are perfect for automotive constraints: LED's a pre-wired/setup for 3.5/5.5/12 v dc while the switch components are setup to handle up to 24v dc.

vex · 03-14-2011, 08:16 PM

Started setting up the vinyl. it's looking pretty good now. Pictures will come later on. Glue takes 24-72 hours to fully set, which means I have to take it in steps; I'm working on the upper bar of the surround. I also will begin work on the dash itself this weekend.

***TitaniumTT*** · 03-14-2011, 09:47 PM

Vex admitted to me through PM's that he is going to use his new found vagina power to channel his inner seemstress into this project

vex · 03-14-2011, 10:13 PM

TTT... You're a bastard.

Martha Stewart would be proud:

vex · 03-14-2011, 10:15 PM

This is the vinyl I'm using. It's called "Whisper Black" and runs about $20 a yard. It's really nice however and well worth the price. This is the texture and shine of the vinyl with a flash taken at point-blank range.

***TitaniumTT*** · 03-14-2011, 10:30 PM

dude.... WHAT THE FUCK ARE THOSE!!!!! At least get some beatup bessy clamps, or go to the chepot and get the spring clamps for $.99 each before thinking about posting a pic like that on the internet to just further the rumor that your vagina is spreading to your head and allowing you to use what look like hairclips while doing seemstress work!!!

***TitaniumTT*** · 03-14-2011, 10:32 PM

In all seriousness though, it looks good. I like how you're sewing the fold into the bottom.

vex · 03-14-2011, 10:34 PM

Quote:

Originally Posted by TitaniumTT

dude.... WHAT THE FUCK ARE THOSE!!!!! At least get some beatup bessy clamps, or go to the chepot and get the spring clamps for $.99 each before thinking about posting a pic like that on the internet to just further the rumor that your vagina is spreading to your head and allowing you to use what look like hairclips while doing seemstress work!!!

Plastic paper clips. I sort of spaced it when it came time to glue, and rather sit there for the minutes and hours it takes to set I asked the woman if she had any paper clips (I don't have any). That's what she brought me, that's what works, that's what I used.

tweiss3 · 03-14-2011, 10:58 PM

Quote:

Originally Posted by titaniumtt

dude.... What the fuck are those!!!!! At least get some beatup bessy clamps, or go to the chepot and get the spring clamps for $.99 each before thinking about posting a pic like that on the internet to just further the rumor that your vagina is spreading to your head and allowing you to use what look like hairclips while doing seemstress work!!!

+105241551423

vex · 03-15-2011, 09:05 AM

I did a test fit with the stock dash surround for both fit and finish. As you can see, the test fit performed well. Neither color overpowers the other, and they both have a dull aged feel to them (I am not currently planning on wrapping the stock surround--but I may consider it when I reupholster the entire dash, but this will not happen until I figure out how to do proper seam accents and seams for that matter with red thread as to match my shifter boot).

Also note that the lower portion of the digi-dash surround is not glued taut yet. That should happen later today if it all goes according to plan. The buttons are pictured below. The only grip I have (the only one) is that the blue buttons are actually above the ring while the red is not. I honestly wish the red mimicked the blue in that respect, but I'm fine with all of them

.

tweiss3 · 03-15-2011, 09:51 AM

Those buttons look nicer in those pictures than the sales pictures

vex · 03-15-2011, 10:00 AM

TTT is lazy.

***TitaniumTT*** · 03-15-2011, 11:01 AM

Effiecient!!! DAMNIT!!! Not Lazy, effiecent! Quicker to have them already loaded than to have to click on each one, wait for it to load etc etc etc....

vex · 03-15-2011, 11:48 AM

My camera on my phone sucks, so I didn't think people would WANT to look at the big pictures unless there was something that really piqued their interest, but cest-le-vi.

I'm starting the lower portion edge wrapping.

***TitaniumTT*** · 03-15-2011, 12:02 PM

You speak french too? Evidence is really piling up huh :ghey: Just kidding, I actually took 6 years of french through middle and high-school.... damned if I remember anything that wouldn't get me slapped

03-14-2011, 03:40 PM	#91
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	I don't have any pictures worth showing. The buttons are listed on page 3 or 4, but they are tits nice. The body is stainless steel and the voltage restrictions are perfect for automotive constraints: LED's a pre-wired/setup for 3.5/5.5/12 v dc while the switch components are setup to handle up to 24v dc. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-14-2011, 08:16 PM	#92
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	Started setting up the vinyl. it's looking pretty good now. Pictures will come later on. Glue takes 24-72 hours to fully set, which means I have to take it in steps; I'm working on the upper bar of the surround. I also will begin work on the dash itself this weekend. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-14-2011, 09:47 PM	#93
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Vex admitted to me through PM's that he is going to use his new found vagina power to channel his inner seemstress into this project __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-14-2011, 10:30 PM	#96
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	dude.... WHAT THE FUCK ARE THOSE!!!!! At least get some beatup bessy clamps, or go to the chepot and get the spring clamps for $.99 each before thinking about posting a pic like that on the internet to just further the rumor that your vagina is spreading to your head and allowing you to use what look like hairclips while doing seemstress work!!! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-14-2011, 10:32 PM	#97
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	In all seriousness though, it looks good. I like how you're sewing the fold into the bottom. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-15-2011, 09:51 AM	#101
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio Posts: 319 Rep Power: 15	Those buttons look nicer in those pictures than the sales pictures __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

03-15-2011, 10:00 AM	#102
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	TTT is lazy. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-15-2011, 11:01 AM	#103
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Effiecient!!! DAMNIT!!! Not Lazy, effiecent! Quicker to have them already loaded than to have to click on each one, wait for it to load etc etc etc.... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-15-2011, 11:48 AM	#104
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	My camera on my phone sucks, so I didn't think people would WANT to look at the big pictures unless there was something that really piqued their interest, but cest-le-vi. I'm starting the lower portion edge wrapping. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-15-2011, 12:02 PM	#105
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	You speak french too? Evidence is really piling up huh :ghey: Just kidding, I actually took 6 years of french through middle and high-school.... damned if I remember anything that wouldn't get me slapped __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**