Car 345, rx7 rally car.

Whizbang · 07-31-2011, 11:21 PM

The remaining portions of the steering was removed today including the steering box and column. The stud that will hit the new subframe were removed and the frame pinch rails notched for clearances. The new steering column was pulled from the parts car as well. Was some progress. Hot as hell today too. Welding tank is getting refilled tomorrow so i can start the finishing the rear flares and the rear subframe studs.

07-31-2011, 11:21 PM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	The remaining portions of the steering was removed today including the steering box and column. The stud that will hit the new subframe were removed and the frame pinch rails notched for clearances. The new steering column was pulled from the parts car as well. Was some progress. Hot as hell today too. Welding tank is getting refilled tomorrow so i can start the finishing the rear flares and the rear subframe studs. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook