Comp diff mount vs OEM diff mount

MaczPayne · 10-21-2008, 07:24 PM

The purpose of the mounts are to absorb energy generated from the torque of the diff during launches. A solid mount would transfer all that energy into it's attached components, instead of absorbing them. As a result, other parts of the rear subframe will have to absorb energy that they were not supposed to see with the non-solid mount, causing more problems in the long run.

I'm convinced the pinion snubber is the way to go.

10-21-2008, 07:24 PM	#11
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	The purpose of the mounts are to absorb energy generated from the torque of the diff during launches. A solid mount would transfer all that energy into it's attached components, instead of absorbing them. As a result, other parts of the rear subframe will have to absorb energy that they were not supposed to see with the non-solid mount, causing more problems in the long run. I'm convinced the pinion snubber is the way to go. __________________ Johnson TA FC in the works! Last edited by MaczPayne; 10-21-2008 at 07:29 PM.