Underhood temps - Page 2

vex · 10-18-2008, 10:13 PM

Quote:

Originally Posted by My5ABaby

I was just looking off www.WaytekWire.com for the wire and terminals. I've seen sites with pre-made harnesses, but I doubt any would work well with the 7. Most are for old hot rods.

Do you have any idea how much I Love you right now (in a non-homo kind of way)? I've been looking for cannon plugs for ages and they sell them. Not only do they sell them, they sell them dirt cheap! Sure they're not the super high density, but this way I can finally do a full on custom harness!

My5ABaby · 10-19-2008, 12:11 PM

Not a problem.

vex · 10-21-2008, 02:52 PM

so what gauge are you going with? 10GA? I don't think wytek has any (semihigh-density) cannon plugs for that ga.

I may be looking again

is there any problem with running 14GA or 16GA? Too much current?

My5ABaby · 10-21-2008, 05:02 PM

I was going to replicate the stock gauging on most things, and go up a bit on some (grounds/starter/etc.).

10-19-2008, 12:11 PM	#17
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 2,377 Rep Power: 20	Not a problem. __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

10-21-2008, 02:52 PM	#18
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 19	so what gauge are you going with? 10GA? I don't think wytek has any (semihigh-density) cannon plugs for that ga. I may be looking again is there any problem with running 14GA or 16GA? Too much current? __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

10-21-2008, 05:02 PM	#19
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 2,377 Rep Power: 20	I was going to replicate the stock gauging on most things, and go up a bit on some (grounds/starter/etc.). __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."