DGRR 2008... a record year!! - Page 2

***Herblenny*** · 02-26-2008, 02:02 PM

Kevin, what do you use for pre-mix? I might have to start doing that

I'm now having little bit of issues with my 8

spankle my wankle · 02-26-2008, 04:34 PM

+1 for my first gen being for sale if it breaks to!

fikren · 02-26-2008, 04:44 PM

"welcome to DGRR, please enjoy the cruises friday and saturday be sure to stick around sunday for the broke down car sale."

***Herblenny*** · 02-26-2008, 11:23 PM

Thanks Kevin! I'm going to pick up a gallon and start pre mixing.. I did notice its starting to idle bit rough and I had some issues during my trip to New Orleans.

spankle my wankle · 02-27-2008, 01:53 AM

Quote:

Originally Posted by fikren

"welcome to DGRR, please enjoy the cruises friday and saturday be sure to stick around sunday for the broke down car sale."

hahaha i wonder who will sponsor that event....phil can take care of that!

WE3RX7 · 02-27-2008, 03:28 PM

You would think after 40 years of rotary engineering in cars, Mazda could get a decent premix system in these cars!

I hadn't started premixing the 8 (bought it used about a month ago)... but perhaps I should start. I premix all the other ones, its only fair!

fire85gslse · 03-01-2008, 09:09 PM

Quote:

Originally Posted by fikren

I think someone posted in one of the other forums that they were bringing a pretty stout truck for towing purposes if it was needed.

That probably was me. I will have my 18ft flatbed trailer.
First time I took it to deals gap a few rotor heads liked hearing the turbo
coming from my hood puling the rex thru the gap. Now it is lifted, I will be a bit slower in the curves but the duramax runs hard for a big truck.

fire85gslse · 03-01-2008, 09:14 PM

I too premix when I can remember to fill the bottle up. it does seem to help on all my rotaries.
And like Kevin said make sure it says "tc-3" on the bottle.

Pourman · 03-02-2008, 01:21 PM

I used Pettit's Pro-Tek R in the FD for a while back when it was still stock ... maybe that's why the first motor went 124K miles before cracking an Apex seal ... i thought about trailering my car up there this year , but I REALLY want to road trip in the FD

... David , good to know you live so close to the Dragon , in case something goes wrong with the car

... BTW , will each day be filled by events , or will there be any time to do anything AT the Village ??

fikren · 03-02-2008, 03:55 PM

Quote:

Originally Posted by Pourman

... BTW , will each day be filled by events , or will there be any time to do anything AT the Village ??

NO...you must not touch anything, you must show up at the scheduled times, you must check in every 30 mins with an event supervisor, you must not talk to anyone, and lights out are at 9:30pm with a 6am wake up.

Actually I think Phil has some things lined up but I do believe there will be ample time to do some things on your own if you want. (if theres not the wife is going to beat me

)

Pourman · 03-03-2008, 10:52 AM

I just didn't want to miss out on anything if I chose to do something else during one of the days ... I'm going up a day early too , so I can help Phil out ... maybe I can explore then

... I'm bringing my Sector 9 and Flowboard too

classicauto · 03-04-2008, 06:19 PM

I'm effin' excited.

Real effin' excited.

Turbo II · 03-05-2008, 12:23 AM

All I know is Phil better get in some driving time this year. And maybe one ride.

***Herblenny*** · 03-05-2008, 10:10 AM

Quote:

Originally Posted by Turbo II

All I know is Phil better get in some driving time this year. And maybe one ride.

I hope so too... Hopefully coming up day early will help!

Also, I'm buying 10 large Pizzas and 3 pitchers of beer on Thursday night.. My treat!! (yes, there is a reason... I'm going to make your ass work at the event next day

).

I'm upgrading some of the stuff on the car and will be testing it out at the Gap

Oh, Exedy guys are also coming up day early So, some of you can have one on one conversation about clutches. They are super cool dudes!

Turbo II · 03-05-2008, 01:36 PM

Quote:

Originally Posted by Herblenny

I hope so too... Hopefully coming up day early will help!

You better, it's only fair.

Quote:

Originally Posted by Herblenny

Also, I'm buying 10 large Pizzas and 3 pitchers of beer on Thursday night.. My treat!! (yes, there is a reason... I'm going to make your ass work at the event next day

).

I can't eat 10 pizzas but 3 pitchers of beer should be no problem!

Quote:

Originally Posted by Herblenny

I'm upgrading some of the stuff on the car and will be testing it out at the Gap

That's what I did last year. Spent Thursday getting use to the new setup. Was different from what I had the year before and really helped.

02-26-2008, 02:02 PM	#16
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	Kevin, what do you use for pre-mix? I might have to start doing that I'm now having little bit of issues with my 8 __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

02-26-2008, 04:44 PM	#18
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN Posts: 318 Rep Power: 18	"welcome to DGRR, please enjoy the cruises friday and saturday be sure to stick around sunday for the broke down car sale." __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets

02-26-2008, 11:23 PM	#19
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	Thanks Kevin! I'm going to pick up a gallon and start pre mixing.. I did notice its starting to idle bit rough and I had some issues during my trip to New Orleans. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

03-01-2008, 09:14 PM	#23
fire85gslse RCC Addict Join Date: Feb 2008 Location: Middle TN Posts: 1,029 Rep Power: 19	I too premix when I can remember to fill the bottle up. it does seem to help on all my rotaries. And like Kevin said make sure it says "tc-3" on the bottle. __________________ I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit)

03-02-2008, 01:21 PM	#24
Pourman Rotary Fanatic Join Date: Mar 2008 Location: Perdido Key , Florida Posts: 320 Rep Power: 18	I used Pettit's Pro-Tek R in the FD for a while back when it was still stock ... maybe that's why the first motor went 124K miles before cracking an Apex seal ... i thought about trailering my car up there this year , but I REALLY want to road trip in the FD ... David , good to know you live so close to the Dragon , in case something goes wrong with the car ... BTW , will each day be filled by events , or will there be any time to do anything AT the Village ?? Last edited by Pourman; 03-02-2008 at 01:27 PM.

02-26-2008, 04:34 PM	#17
spankle my wankle Rotary Fanatic Join Date: Feb 2008 Posts: 185 Rep Power: 18	+1 for my first gen being for sale if it breaks to!

02-27-2008, 03:28 PM	#21
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	You would think after 40 years of rotary engineering in cars, Mazda could get a decent premix system in these cars! I hadn't started premixing the 8 (bought it used about a month ago)... but perhaps I should start. I premix all the other ones, its only fair!

03-03-2008, 10:52 AM	#26
Pourman Rotary Fanatic Join Date: Mar 2008 Location: Perdido Key , Florida Posts: 320 Rep Power: 18	I just didn't want to miss out on anything if I chose to do something else during one of the days ... I'm going up a day early too , so I can help Phil out ... maybe I can explore then ... I'm bringing my Sector 9 and Flowboard too Last edited by Pourman; 03-04-2008 at 12:32 AM.

03-04-2008, 06:19 PM	#27
classicauto crash auto?fix auto Join Date: Feb 2008 Posts: 816 Rep Power: 18	I'm effin' excited. Real effin' excited.

03-05-2008, 12:23 AM	#28
Turbo II Zoom Freaking Zoom Join Date: Mar 2008 Location: NC Posts: 324 Rep Power: 18	All I know is Phil better get in some driving time this year. And maybe one ride. __________________ 1988 RX-7 Convertible 1991 RX-7 Turbo 2004 RX-8 GT 1985 RX-7 GSL - Sold