I'm Back! '90 GTUs - Page 20

GySgtFrank · 07-25-2017, 11:01 AM

I have to agree, the RB system is hard to beat even if it is a bit more expensive than some. Ya gets what ya paid for.

project86 · 07-25-2017, 01:28 PM

Quote:

Originally Posted by djmtsu

RB system is 100% the way to go on an NA rotary. Just listen to Zach's!!!!

I had it and loved it, only changed mine when I went turbo to free up a little more HP. That being said, the RB had a way better sound, and of course I used the RB downpipe and pre-silencer with the Apexi N1 EVO.

Quote:

Originally Posted by GySgtFrank

I have to agree, the RB system is hard to beat even if it is a bit more expensive than some. Ya gets what ya paid for.

I think that will be what I do. I also completely agree about getting what you pay for. I was just looking at shipping costs on their site.... shipping for the full kit is about $140 to me which totals the kit out at $1457.07. If i but everything but the header it comes to $989.00 but shipping jumps up to $228.37 for a total of $1217.37. I emailed customer service to see if there is anything they can do about the shipping charge. Just seems excessive to come close to doubling the shipping charge when im ordering less.

Johnny_K · 07-25-2017, 02:45 PM

I also like RB and thats what i have on the BB FD.

And yea shipping cost is stupid.

project86 · 07-25-2017, 04:53 PM

Quote:

Originally Posted by Johnny_K

I also like RB and thats what i have on the BB FD.

And yea shipping cost is stupid.

Apparently I’ll have to call to place the order so they can appropriately adjust the shipping.

FC Zach · 07-25-2017, 10:57 PM

Quote:

Originally Posted by project86

Now I'm seriously shopping for an exhaust. Mine is leaking pretty bad, its loud and it sounds stupid.

It did sound like it had a hole in it. . like it was from the split air pipe.

Quote:

Originally Posted by project86

I've been considering getting the complete road race system from Racing Beat because i like the quality, sound and that it looks stock but I'm open to other options as well that might save some coin. Any suggestions?

Do it!

almoststockfc · 07-26-2017, 06:18 AM

Quote:

Originally Posted by project86

I've been considering getting the complete road race system from Racing Beat because i like the quality, sound and that it looks stock but I'm open to other options as well that might save some coin. Any suggestions?

We have a good friend that could make you one. Don't know the cost though.

FC Zach · 07-26-2017, 06:40 AM

Quote:

Originally Posted by almoststockfc

We have a good friend that could make you one. Don't know the cost though.

Coffey? Shepard?

project86 · 07-26-2017, 10:16 AM

Quote:

Originally Posted by FC Zach

It did sound like it had a hole in it. . like it was from the split air pipe.

Do it!

I mitigated the split air pipe issue. Unbolted it and stuffed the hole on the exhaust with JB Weld. Its sounds like now its leaking from the manifold.

I think I'm going to... but after I get my wheels powder coated. I can hardly stand to look at the stupid wheels on it anymore.

Can anyone recommend a good place to have them powder coated?

Johnny_K · 07-26-2017, 02:35 PM

This guy PC some wheels for me back when i was drifting
http://www.bamcustoms.com/ he's also on FB.

project86 · 07-26-2017, 03:07 PM

Quote:

Originally Posted by Johnny_K

This guy PC some wheels for me back when i was drifting
http://www.bamcustoms.com/ he's also on FB.

Was the quality good? I got a quote from Middle Tennessee Powder Coating. Pricing is consistent with what I've seen so far but he said they are like 10-12 weeks out right now. I was really hoping to get it done sooner.

almoststockfc · 07-27-2017, 06:16 AM

Quote:

Originally Posted by FC Zach

Coffey? Shepard?

Yes and yes

djmtsu · 07-27-2017, 09:51 AM

Shepard is out of the country at the moment.

And sorry, but I don't think an NA FC is worth the $$$ amount that either one of those two would charge for an exhaust system.

Dustin wanted to charge me over $2000 to fix the frame rail on the Cosmo. Carter did it in one evening, for free. (well returning a favor).

project86 · 07-27-2017, 09:58 AM

Quote:

Originally Posted by djmtsu

Shepard is out of the country at the moment.

And sorry, but I don't think an NA FC is worth the $$$ amount that either one of those two would charge for an exhaust system.

Dustin wanted to charge me over $2000 to fix the frame rail on the Cosmo. Carter did it in one evening, for free. (well returning a favor).

I mean.. you can't really fault someone running a business for charging you what they are worth. It obviously wasnt worth $2000 to you but again..... business is business. If I wanted a custom exhaust for my car I would expect the price/quality to reflect custom.

djmtsu · 07-27-2017, 10:10 AM

It was 'side work', not through the business.........I don't ask for discounts from people I know.

project86 · 07-27-2017, 10:17 AM

Quote:

Originally Posted by djmtsu

It was 'side work', not through the business.........I don't ask for discounts from people I know.

In that case I can understand your frustration.

07-25-2017, 11:01 AM	#286
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. Posts: 1,008 Rep Power: 16	I have to agree, the RB system is hard to beat even if it is a bit more expensive than some. Ya gets what ya paid for. __________________ 1988 N/A SE 2+2, dead stock and staying that way. 1979 SA22C stock? Not so much. http://rotarycarclub.com/rotary_foru...ad.php?t=15585

07-27-2017, 09:51 AM	#297
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Shepard is out of the country at the moment. And sorry, but I don't think an NA FC is worth the $$$ amount that either one of those two would charge for an exhaust system. Dustin wanted to charge me over $2000 to fix the frame rail on the Cosmo. Carter did it in one evening, for free. (well returning a favor). __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

07-27-2017, 10:10 AM	#299
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	It was 'side work', not through the business.........I don't ask for discounts from people I know. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

07-25-2017, 02:45 PM	#288
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 12	I also like RB and thats what i have on the BB FD. And yea shipping cost is stupid.

07-26-2017, 02:35 PM	#294
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 12	This guy PC some wheels for me back when i was drifting http://www.bamcustoms.com/ he's also on FB.