Project86- My first (and probably not the last) Rebuild - Page 26

FC3S Murray · 05-04-2011, 07:51 AM

Man that white is so nice looking Kyle! I am just trying to imagine it with your super secret wheels on

Thanks again for all the hard work on my bumper. Man that was a fun experience wasnt it lol

project86 · 05-04-2011, 07:58 AM

Oops

project86 · 05-04-2011, 08:03 AM

Quote:

Originally Posted by FC3S Murray

Man that white is so nice looking Kyle! I am just trying to imagine it with your super secret wheels on

Thanks again for all the hard work on my bumper. Man that was a fun experience wasnt it lol

Thanks Sean! I cant wait to get going on this thing. It's too bad the mice invaded but I'm gettin it cleaned up. I'm really hoping the car will start coming back together very soon after i move.

Also no problem on your stuff. Thanks for being patient with me. It was fun painting that stuff. I have some of kyles to do this weekend and then his whole car soon to follow. I think I'm gonna talk to the guy here about using his place to paint it:

djmtsu · 06-30-2011, 08:57 AM

Sooooo.......when are you moving to Tennessee??

There's RX-7's here that need some body work!

chibikougan · 10-27-2013, 09:49 PM

?

project86 · 10-27-2013, 10:14 PM

Well guys after a very long disappearance im back. Army training has had me swamped but im stationed at Ft. Campbell so if there are any rotary friends around here you know where to find me. I dont have my car down here yet. Its still in MT until i get a house and a garage to keep it in.. should be moving out of the barracks soon as i just got married. When things start really rolling again ill get some more progress up on here.

Anyone know of some reliable car shippers i could go through to get the 7 down here?

chibikougan · 10-27-2013, 10:20 PM

Great to hear from ya. Congrats on getting married.

project86 · 04-08-2014, 06:37 PM

Oh man! Thought I was gonna have to dig for this thread. Lucky me! Well I have my car back finally. It's good and bad... Good cause I can tinker bad because I'm supposed to deploy later this year. Anyhow I'll try to make some regular updates and not be such a stranger!

chibikougan · 04-08-2014, 06:49 PM

Cool!

project86 · 12-07-2014, 07:41 AM

yo! so I put the car on a couple stands last night in hopes to get some hub swapping underway. No such luck because I can't get the brake rotors off. I was hoping someone might have a good way to do this.. I know its really pretty straight forward but they are on there pretty good. The two screws that hold it to the hub are really stuck. Also.. Im wondering if the hubs i have are worth using or if i should try to find some nicer ones. What do you think?

GySgtFrank · 12-07-2014, 10:29 AM

From the looks of it, you're probably at the point of drilling them out. If you have access to a welder you could try cleaning up the head a little bit and welding a piece of metal on there, so you can get hold of it. That may not work either if it's really stuck. I would assume you've already cleaned up any threads showing out the back side with a wire brush and soaked it in penetrating oil.

chibikougan · 12-07-2014, 12:21 PM

Impact Driver hammer driven. Some PB blaster can help too.

http://www.atgstores.com/drill-acces...l4RBoC3wXw_wcB

project86 · 12-07-2014, 03:24 PM

Any advice on whether or not those hubs are worth a crap?

project86 · 12-07-2014, 03:28 PM

So i just checked mazdatrix... new 5 bolt hubs are $535 each... yuck... is there somewhere else i can get them cheaper?

Pete_89T2 · 12-07-2014, 04:10 PM

Quote:

Originally Posted by project86

Any advice on whether or not those hubs are worth a crap?

The hubs will probably be fine once you get the old disk rotor off it.

05-04-2011, 07:51 AM	#376
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	Man that white is so nice looking Kyle! I am just trying to imagine it with your super secret wheels on Thanks again for all the hard work on my bumper. Man that was a fun experience wasnt it lol __________________ Same pig, new soul

05-04-2011, 07:58 AM	#377
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	Oops __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure" Last edited by project86; 05-04-2011 at 08:05 AM.

06-30-2011, 08:57 AM	#379
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Sooooo.......when are you moving to Tennessee?? There's RX-7's here that need some body work! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

10-27-2013, 10:14 PM	#381
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	Well guys after a very long disappearance im back. Army training has had me swamped but im stationed at Ft. Campbell so if there are any rotary friends around here you know where to find me. I dont have my car down here yet. Its still in MT until i get a house and a garage to keep it in.. should be moving out of the barracks soon as i just got married. When things start really rolling again ill get some more progress up on here. Anyone know of some reliable car shippers i could go through to get the 7 down here? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

12-07-2014, 10:29 AM	#386
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. Posts: 1,009 Rep Power: 16	From the looks of it, you're probably at the point of drilling them out. If you have access to a welder you could try cleaning up the head a little bit and welding a piece of metal on there, so you can get hold of it. That may not work either if it's really stuck. I would assume you've already cleaned up any threads showing out the back side with a wire brush and soaked it in penetrating oil. __________________ 1988 N/A SE 2+2, dead stock and staying that way. 1979 SA22C stock? Not so much. http://rotarycarclub.com/rotary_foru...ad.php?t=15585

12-07-2014, 03:24 PM	#388
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	Any advice on whether or not those hubs are worth a crap? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

12-07-2014, 03:28 PM	#389
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	So i just checked mazdatrix... new 5 bolt hubs are $535 each... yuck... is there somewhere else i can get them cheaper? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"