Fenda's uber garage Engine Build - Page 27

***TitaniumTT*** · 07-25-2016, 08:32 AM

It all really depends on the app and what you're looking for. You wanted alot of power on pump, which means bigger turbo and spool will suffer comparatively.

I would like to see all three turbos run @ 25psi to see the spool and the ultimate power potential. Mapped against EMAP would also be interesting to see but I know that's not going to happen

Fendamonky · 07-25-2016, 08:59 AM

True. In all reality I don't imagine I'll want much more than 350whp for normal driving. However, I also don't want to be limited to a total potential of 400-450whp, which I'm worried the 8374 may have realistically done.

Further on down the line I'd love to do a side-by-side comparison of the 7670, 8374, 9174, and whatever GTX35## is bouncing around at the time. But that's not likely to happen unless I've either got money burning a big ass hole in my pocket (which the wife wouldn't allow), or they were temporarily donated by other owners.

I'm hoping that, despite the larger size, the lag/response won't be *that* much worse than what I was experiencing with the Precision Turbo... If I can get near the horizontal line of a torque curve, and have boost pretty much leveled out, by mid-3krpms than I'll call that a win.

***TitaniumTT*** · 07-25-2016, 09:23 AM

Sooooooooooooooo my turbo

Fendamonky · 07-25-2016, 11:04 AM

Quote:

Originally Posted by TitaniumTT

Sooooooooooooooo my turbo

The P6265 also worked pretty well for what I was looking for... Until it got ran without oil

speedjunkie · 07-27-2016, 01:14 AM

Quote:

Originally Posted by Fendamonky

Just waiting for the paypal to clear, then Andy will kick the EFR my way

Wait, Andy here in Colorado Springs? I got my current turbo through him. He has great deals. He told me I should start selling them too lol. He's also starting to make oil cooler kits. He's helping me set up my suspension because his booty is way more calibrated than mine to stuff like that lol. I'm more tuned in to boost response.

Andy is VERY happy with the 8374, but so far I'm kinda missing the 7670. And another friend here was telling me we should do a compound setup with two 7670s lol. Might have to try that.

As for your comparison test, I still have my old 7670 but it may need to be rebuilt. I'm pretty sure the oil seals are bad and I accidentally bent one of the compressor blades when my glove grabbed it when my hand was nearby. Anyway, I'm not sure if they can be rebuilt but I'd be willing to lend it to you for testing.

Fendamonky · 07-27-2016, 03:57 AM

Yup, same Andy!

I def appreciate the thought/offer, for now I just want to focus on getting her back on the road though ^_^

07-25-2016, 08:32 AM	#391
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	It all really depends on the app and what you're looking for. You wanted alot of power on pump, which means bigger turbo and spool will suffer comparatively. I would like to see all three turbos run @ 25psi to see the spool and the ultimate power potential. Mapped against EMAP would also be interesting to see but I know that's not going to happen __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-25-2016, 09:23 AM	#393
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Sooooooooooooooo my turbo __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**