Project86- My first (and probably not the last) Rebuild - Page 6

project86 · 09-30-2009, 12:02 AM

well i know the piece on the hood is lining up. i looked some more and the tension on the spring is just so high that it wont close by just droppin it like normal. i could probably push it, and i tried, but it was flexing alot so i opted not to. talked to a friend today too about it and he said he had the same problem so he just replaced the spring with a lighter one which is what i think ill do as soon as i have time. Thanks for all the input.

project86 · 10-01-2009, 12:30 AM

so i replaced the spring today and now it shuts with no problem. i will need hoodpins however. im lookin at the aerocatch flush mounts. any word ont them?

***TitaniumTT*** · 10-01-2009, 06:46 AM

LOVE EM

Just really REALLY take your time mounting them up as you only get one chance to cut a hole that big in your hood.

You can see where I mounted mine. I started by taping off the area where I wanted to mount them and measuring out where the center line would be. Measured where the pin would come throug, lined it up with the support and made a mark. Measured the distance tot he the top, the bottom, did some math based on the diameter of the the two rounds, drew them up triple checked everything and then used two different hole saws for the top and bottom and a cut-off wheel to cut out the remaining.

You'll have to trim the supports on the underside of the hood to be able to get to the nuts.

Make sure you get the locking kind. I've come out to my car in the past to find the alarm tripped and one of the latches was attempted to be opened.

I love them, absolutely love them. I've heard alot of people talk poorly of them, then I come to find out they installed them in 20 minutes as opposed to the probably 4 hours that I spent. In other words, in-correct installation will result in sucky latches.

FC3S Murray · 10-01-2009, 07:15 AM

What was the verdict on the hood color Kyle? I can't remeber if you were gonna paint it or clear it? Those aerocatch's look badass. After seeing them on Brians FC I was sold, if I ever get an aftermarket hood(very soon with a couple extra goodies this winter) they would be the ones I order.

Good progress bro! Keep it up you lucky SOB

project86 · 10-03-2009, 04:30 AM

hood color is gonna stay cf. im gonna re clear it with the parrot though

project86 · 10-08-2009, 01:17 PM

ok.. so i was hoping to have the car in primer this week but i didnt have class for 2 day which put a pretty big damper on gettin anything done. however, the body work will be finished today. i am still in need of an s5 front bumper though if anyone has one they would like to get rid of for a reasonable price. i emailed mazdatrix a couple weeks ago and they said they had one in good used condition but they wanted 250 for it and that doesnt include shipping...

they also wouldnt send me any pictures. so again if anyone following me on here has one share the love !!!

project86 · 10-16-2009, 12:13 PM

hooray for updates. the car has primer on it and i will post pictures tonight or tomorrow. its also my bday tomorrow:! Party!!!

FC3S Murray · 10-16-2009, 01:14 PM

HELL YES!!!!!

Did Ransom stop by and look at those exhaust hangers?

project86 · 10-18-2009, 08:14 PM

Quote:

Originally Posted by FC3S Murray

HELL YES!!!!!

Did Ransom stop by and look at those exhaust hangers?

Sean he did stop by but as you already know i my car was all masked for primer. Matt said he got you one so i hope you have everthing back in good shape now

. ill start sanding again monday.. so here are the primer pics..........

FC3S Murray · 10-19-2009, 09:14 PM

Man this build is going to be SWEET

project86 · 10-22-2009, 11:51 PM

quick update.... noDOHC is sellin me his s5 front bumper!!! thanks man

. i also have a set of the aerocatch hood pins on the way! ill be re clearing my cf hood soon as well i believe.... sean can you say glasurit?

project86 · 10-26-2009, 12:43 AM

Got my aerocatch hoodpins sat. im excited for install

WE3RX7 · 10-26-2009, 03:23 PM

Nice - I'm jealous your car is in primer and I'm still waiting on a hood to be made (its been a month now since I paid the deposit and an ETA is still nowhere to be seen)...

Hope to see some color laid down soon man, keep it up!

project86 · 10-26-2009, 08:16 PM

i have one more coat of primer to do. i just finished sanding the first coat today.

project86 · 11-01-2009, 09:08 PM

ah shit... well ive been pretty lazy this week..well moving but i havent felt like doing much. i missed 3 days of class because of it. but the car is remasked for the next round of primer. i think i may end up tackling the interior revamp while its in the shop too.

09-30-2009, 12:02 AM	#76
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	well i know the piece on the hood is lining up. i looked some more and the tension on the spring is just so high that it wont close by just droppin it like normal. i could probably push it, and i tried, but it was flexing alot so i opted not to. talked to a friend today too about it and he said he had the same problem so he just replaced the spring with a lighter one which is what i think ill do as soon as i have time. Thanks for all the input. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

10-01-2009, 12:30 AM	#77
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	so i replaced the spring today and now it shuts with no problem. i will need hoodpins however. im lookin at the aerocatch flush mounts. any word ont them? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

10-01-2009, 06:46 AM	#78
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	LOVE EM Just really REALLY take your time mounting them up as you only get one chance to cut a hole that big in your hood. You can see where I mounted mine. I started by taping off the area where I wanted to mount them and measuring out where the center line would be. Measured where the pin would come throug, lined it up with the support and made a mark. Measured the distance tot he the top, the bottom, did some math based on the diameter of the the two rounds, drew them up triple checked everything and then used two different hole saws for the top and bottom and a cut-off wheel to cut out the remaining. You'll have to trim the supports on the underside of the hood to be able to get to the nuts. Make sure you get the locking kind. I've come out to my car in the past to find the alarm tripped and one of the latches was attempted to be opened. I love them, absolutely love them. I've heard alot of people talk poorly of them, then I come to find out they installed them in 20 minutes as opposed to the probably 4 hours that I spent. In other words, in-correct installation will result in sucky latches. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

10-01-2009, 07:15 AM	#79
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	What was the verdict on the hood color Kyle? I can't remeber if you were gonna paint it or clear it? Those aerocatch's look badass. After seeing them on Brians FC I was sold, if I ever get an aftermarket hood(very soon with a couple extra goodies this winter) they would be the ones I order. Good progress bro! Keep it up you lucky SOB __________________ Same pig, new soul

10-03-2009, 04:30 AM	#80
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	hood color is gonna stay cf. im gonna re clear it with the parrot though __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

10-08-2009, 01:17 PM	#81
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	ok.. so i was hoping to have the car in primer this week but i didnt have class for 2 day which put a pretty big damper on gettin anything done. however, the body work will be finished today. i am still in need of an s5 front bumper though if anyone has one they would like to get rid of for a reasonable price. i emailed mazdatrix a couple weeks ago and they said they had one in good used condition but they wanted 250 for it and that doesnt include shipping... they also wouldnt send me any pictures. so again if anyone following me on here has one share the love !!! __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

10-16-2009, 12:13 PM	#82
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	hooray for updates. the car has primer on it and i will post pictures tonight or tomorrow. its also my bday tomorrow:! Party!!! __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

10-16-2009, 01:14 PM	#83
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	HELL YES!!!!! Did Ransom stop by and look at those exhaust hangers? __________________ Same pig, new soul

10-19-2009, 09:14 PM	#85
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	Man this build is going to be SWEET __________________ Same pig, new soul

10-22-2009, 11:51 PM	#86
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	quick update.... noDOHC is sellin me his s5 front bumper!!! thanks man . i also have a set of the aerocatch hood pins on the way! ill be re clearing my cf hood soon as well i believe.... sean can you say glasurit? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

10-26-2009, 12:43 AM	#87
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	Got my aerocatch hoodpins sat. im excited for install __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

10-26-2009, 03:23 PM	#88
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Nice - I'm jealous your car is in primer and I'm still waiting on a hood to be made (its been a month now since I paid the deposit and an ETA is still nowhere to be seen)... Hope to see some color laid down soon man, keep it up!

10-26-2009, 08:16 PM	#89
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	i have one more coat of primer to do. i just finished sanding the first coat today. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

11-01-2009, 09:08 PM	#90
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	ah shit... well ive been pretty lazy this week..well moving but i havent felt like doing much. i missed 3 days of class because of it. but the car is remasked for the next round of primer. i think i may end up tackling the interior revamp while its in the shop too. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"