81' FB restoration - Page 6

Jeezus · 10-03-2009, 12:45 PM

Yeah, I am aimin for it!

BigIslandSevens · 10-04-2009, 05:02 PM

Well I fixed my brake issues today. 1 fitting was just a little loose, and the new hose from the body to axle just needed a crush washer on it and it sealed up fine. Bled the entire system again and it seems to work well. I have a slight rubbing noise from the left rear disc when I go around left turns. ( I think it may be the dust shield. It looks a tad bent at the top edge.

The e-fan keeps the car chillin. The new gearing seems a bit quicker. Hard to tell. It's been too long since I drove it enough. I guess Stu or Tim and I will need to "compare"

I reaasembled the bodywork today as well. I really need to drive it

Then I will tear back into it for the rest of the paintwork/ bodywork.

A word of CAUTION: Please be carefull if you are ever working in the storage bin areas, The edges of the metal are EXTREMELY sharp!! I silced a big chunk out of my hand that just flaps back and forth. Since I am 1 of the 50 Million uninsured, It was going to cost me 600.00 at the local urgent care for stitches

I am forced to work with butterfly bandages and super glue

Anyways, BE CAREFULL.!!!

t_g_farrell · 10-08-2009, 12:12 PM

So whats the news this week?

BigIslandSevens · 10-08-2009, 06:40 PM

Well, I have just been driving it and looking for the "little" things to come up. Such as the driveshaft flange bolts failed to get torqued upon final inspection. I had a vibration apear from nowhere.... Fixed that. The brakes feel awsome and work great! Stopping power was greatly increased

Hacked up the exhaust today as it was hangiing sooo low and scraping when I farted. The flange at the front where it meets the header was welded on crooked. Not pretty but I need to replace that section at some point anyhow.

I will say that I LOVE the sound of the exhaust and how I can talk to my wife next to me. The only Rx we have that we can do that in

Also the car has alot more snap to it I think( butt dyno) First gear is almost a wasted gear with the 4.77 in the back. I need to run with the local crew at the Blue ridge parkway run and see. I believe the speedo is 3-4 MPH off because of the change in gear as well. I am very happy with the results of the gear swap and the LSD install. I loove traction!!!Even left 2 black marks just cause I could

Whizbang · 10-08-2009, 06:47 PM

so you like the gearing then?

BigIslandSevens · 10-08-2009, 06:52 PM

very much so.

Whizbang · 10-08-2009, 06:54 PM

im excited to see how my car is since the wife got it running. All i have is a teaser video.

t_g_farrell · 10-09-2009, 07:18 AM

Yeah that exhaust does sound sweet, its less raw than the RB SP one I put on but I think its a bit more restrictive and it collects right after the header. I'm glad you made good use of it.

Are you bringing the wifey on the B3RR trip then? What about the puppy?

BigIslandSevens · 10-09-2009, 07:29 AM

Yeah if we make it the wife and puppy will be with. The puppy likes riding in the FB

We go for a drive everyday recently. And the area we will be in has a couple trails that are dog friendly and the campsite is as well. They must stay leashed though.

Sadly I have been looking into traveling with the dog on a road trip west next year or so. The problem is that NONE of the National parks allow dogs at all. Kinda pisses me off since that land is mine and I can't use it with my entire family( the land is also yours and every other tax paying Americans

) The "good" that I have found is that next to most of the National parks there is a State park that will allow dogs. Anyways, this has nothing to do with my resto so I will STFU already

Whizbang · 10-09-2009, 04:13 PM

my dog loves the rx7 car rides as well. claims the hatch as him domain.

t_g_farrell · 10-20-2009, 09:10 AM

Hows the car doing? No news is good news I suppose.

Anymore new painted bits?

You still up for B3R this weekend?

BigIslandSevens · 10-20-2009, 09:19 AM

I just painted the underside of the hood 2 days ago. It should be cured enough to mount back up today. Been cruising with a true cold air intake the last 2 days

So now the entire enginebay has been done other than the fender inner lips.( in primer still)

The car is running great. I made a aluminum insert for the center console. As the stock plastic was in 3 pieces do to redneck stereo mounting

So I made a new "first piece" that covers the entire thing.Mounted the new cheap stereo headunit and fixed all the hacked up wiring under there.

Fixed my mirror rattles. Then the passenger side one blew up

oops.
If the state ever pays us we will be able to go for a cruise Sat. Probably won't camp out. We may head to our place in Saluda and stay there with the dog. we'll see.

RCCAZ 1 · 10-20-2009, 01:47 PM

I'd love to see a few pics of the completed car (all 4 sides) if you have them. Great job and beautiful outcome!!

BigIslandSevens · 10-20-2009, 03:14 PM

I'll have some when the entire car gets done. I am starting on the door jams, the door interior paint, and the rear hatch jam next. Having the time to tear it down is beginning to get difficult. Hopefully in another month it will be completed.

Thanks for the compliments on the progress so far.

Jeezus · 11-01-2009, 09:03 PM

Bizzump!

10-08-2009, 12:12 PM	#3
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC Posts: 757 Rep Power: 0	So whats the news this week? __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

10-08-2009, 06:40 PM	#4
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC Posts: 201 Rep Power: 18	Well, I have just been driving it and looking for the "little" things to come up. Such as the driveshaft flange bolts failed to get torqued upon final inspection. I had a vibration apear from nowhere.... Fixed that. The brakes feel awsome and work great! Stopping power was greatly increased Hacked up the exhaust today as it was hangiing sooo low and scraping when I farted. The flange at the front where it meets the header was welded on crooked. Not pretty but I need to replace that section at some point anyhow. I will say that I LOVE the sound of the exhaust and how I can talk to my wife next to me. The only Rx we have that we can do that in Also the car has alot more snap to it I think( butt dyno) First gear is almost a wasted gear with the 4.77 in the back. I need to run with the local crew at the Blue ridge parkway run and see. I believe the speedo is 3-4 MPH off because of the change in gear as well. I am very happy with the results of the gear swap and the LSD install. I loove traction!!!Even left 2 black marks just cause I could Last edited by BigIslandSevens; 10-08-2009 at 06:53 PM.

10-08-2009, 06:47 PM	#5
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	so you like the gearing then? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-08-2009, 06:54 PM	#7
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	im excited to see how my car is since the wife got it running. All i have is a teaser video. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-09-2009, 07:18 AM	#8
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC Posts: 757 Rep Power: 0	Yeah that exhaust does sound sweet, its less raw than the RB SP one I put on but I think its a bit more restrictive and it collects right after the header. I'm glad you made good use of it. Are you bringing the wifey on the B3RR trip then? What about the puppy? __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

10-03-2009, 12:45 PM	#1
Jeezus The Newbie Join Date: Sep 2009 Posts: 18 Rep Power: 0	Yeah, I am aimin for it!

10-04-2009, 05:02 PM	#2
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC Posts: 201 Rep Power: 18	Well I fixed my brake issues today. 1 fitting was just a little loose, and the new hose from the body to axle just needed a crush washer on it and it sealed up fine. Bled the entire system again and it seems to work well. I have a slight rubbing noise from the left rear disc when I go around left turns. ( I think it may be the dust shield. It looks a tad bent at the top edge. The e-fan keeps the car chillin. The new gearing seems a bit quicker. Hard to tell. It's been too long since I drove it enough. I guess Stu or Tim and I will need to "compare" I reaasembled the bodywork today as well. I really need to drive it Then I will tear back into it for the rest of the paintwork/ bodywork. A word of CAUTION: Please be carefull if you are ever working in the storage bin areas, The edges of the metal are EXTREMELY sharp!! I silced a big chunk out of my hand that just flaps back and forth. Since I am 1 of the 50 Million uninsured, It was going to cost me 600.00 at the local urgent care for stitches I am forced to work with butterfly bandages and super glue Anyways, BE CAREFULL.!!!

10-08-2009, 06:52 PM	#6
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC Posts: 201 Rep Power: 18	very much so.

10-09-2009, 07:29 AM	#9
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC Posts: 201 Rep Power: 18	Yeah if we make it the wife and puppy will be with. The puppy likes riding in the FB We go for a drive everyday recently. And the area we will be in has a couple trails that are dog friendly and the campsite is as well. They must stay leashed though. Sadly I have been looking into traveling with the dog on a road trip west next year or so. The problem is that NONE of the National parks allow dogs at all. Kinda pisses me off since that land is mine and I can't use it with my entire family( the land is also yours and every other tax paying Americans ) The "good" that I have found is that next to most of the National parks there is a State park that will allow dogs. Anyways, this has nothing to do with my resto so I will STFU already

10-09-2009, 04:13 PM	#10
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	my dog loves the rx7 car rides as well. claims the hatch as him domain. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-20-2009, 09:10 AM	#11
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC Posts: 757 Rep Power: 0	Hows the car doing? No news is good news I suppose. Anymore new painted bits? You still up for B3R this weekend? __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

10-20-2009, 09:19 AM	#12
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC Posts: 201 Rep Power: 18	I just painted the underside of the hood 2 days ago. It should be cured enough to mount back up today. Been cruising with a true cold air intake the last 2 days So now the entire enginebay has been done other than the fender inner lips.( in primer still) The car is running great. I made a aluminum insert for the center console. As the stock plastic was in 3 pieces do to redneck stereo mounting So I made a new "first piece" that covers the entire thing.Mounted the new cheap stereo headunit and fixed all the hacked up wiring under there. Fixed my mirror rattles. Then the passenger side one blew upoops. If the state ever pays us we will be able to go for a cruise Sat. Probably won't camp out. We may head to our place in Saluda and stay there with the dog. we'll see.

10-20-2009, 01:47 PM	#13
RCCAZ 1 Rotary Fanatic Join Date: Mar 2008 Location: Phoenix, AZ Posts: 288 Rep Power: 18	I'd love to see a few pics of the completed car (all 4 sides) if you have them. Great job and beautiful outcome!!

10-20-2009, 03:14 PM	#14
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC Posts: 201 Rep Power: 18	I'll have some when the entire car gets done. I am starting on the door jams, the door interior paint, and the rear hatch jam next. Having the time to tear it down is beginning to get difficult. Hopefully in another month it will be completed. Thanks for the compliments on the progress so far.

11-01-2009, 09:03 PM	#15
Jeezus The Newbie Join Date: Sep 2009 Posts: 18 Rep Power: 0	Bizzump!