FD3S RX-7 Engine Mounted Oil Catch Tank GB - Page 8

afgmoto1978 · 12-08-2011, 10:10 PM

Quote:

Originally Posted by aoc007

I still have the old tank so I dont need the new one right away but I'd like to have it in the next couple months before the new track season starts.

I will either have this welder repaired or get another one within a 1/1.5 months so I will have the remaining tanks done late January/February.

aoc007 · 12-08-2011, 10:25 PM

Sounds good, I probably won't be on track again til after that, need some time to rebuild.

speedjunkie · 12-09-2011, 01:33 PM

I'm not in the US right now, but I'll need to install it right when I get back, so if possible I'd like to have mine now.

Dep next to my name means I paid the deposit right? I'm pretty sure I did, but I don't remember for sure, I'd have to go back and look at my paypal history.

Thanks Adam!

FierceAlien · 12-09-2011, 11:58 PM

Quote:

Originally Posted by afgmoto1978

Sigh, I want to apologize, unfortunately my welder went into a fritz and it needs to get it fixed. I'm waiting for a reply from a Miller tech services rep on what needs to be fixed.

So at this point in time I'm on hold again on welding the remaining tanks until I can get it fixed. I'm really really sorry about this guys.

At this point in time I have three tanks that are completely welded up and ready to be put together as kits. So in the meantime while I try and get my welder fixed I will be finishing three catch tank kits ASAP. I will be working on the rear turbo side vent lines and remaining parts needed this weekend.

So at this point in time I need to know which three of the list below needs tanks NOW instead of later.

1. speedjunkie - Dep
2. RedR1 - Deposit Paid - Polished Catch Tank
3. Zhe
4. Scrubolio - Dep

The guys below I know are either not in a position that they need the tanks NOW in order to get their cars running OR need premix tanks which I do not have any done. Thanks for your patience guys! FierceAlien, I'm really sorry.

1. Astrokid - Paid in Full - Catch Tank - Raw Finish
2. Matt Hardwick - Xenocide0 - Deposit Paid - Pre - Mix Tank - Satin Black
3. FierceAlien - Deposit Paid - Premix tank - Satin Black
4. Jesse Frame - aka Prometheus - Paid in Full - Catch Tank - Satin Finish
5. Rob - Paid in full - Custom AN Fittings - Raw finish
6. aoc007 - Paid in Full - Catch Tank - Satin Black

afgmoto1978 · 12-10-2011, 10:24 AM

I know I'm really sorry, really really frustrated about this. Will be taking the welder to a local welding repair shop. It's either and SCR or a board, they will have to put a scope on the output to see what going on.

silverfdturbo6port · 12-13-2011, 01:17 AM

Quote:

Originally Posted by afgmoto1978

Lol, in won't be a decade from now. If your serious I will be selling my extra tank early next year, mind you at full price. If you want it buy it.

Adam

Yea im serious about getting one from you. I can wait for one in the spring the members before me deserve one first. Nice product by the way

FierceAlien · 01-12-2012, 06:15 AM

Checking in. Can we can an update please?

silverfdturbo6port · 01-13-2012, 01:39 AM

yes please updates. did you fix the ol tig welder?

afgmoto1978 · 01-14-2012, 10:49 AM

I went ahead and made the decision to make the rear vent line out of stainless. A bit more expensive, but I get a better product. So I picked up all the stainless laser cut pieces I had made yesterday and currently working on the right rear breather lines (bent and welded) today. I should have most of them done by the end of this weekend.

Come Tuesday I will be taking my welder to a different local repair shop that guarantees one week turnaround time for repairs. So come the 24th I will be back in business for welding the aluminum tanks.

speedjunkie · 01-15-2012, 05:27 AM

Cool, I'll be coming back around that time and I'm gonna need it quick lol. Thanks for the update!

afgmoto1978 · 01-15-2012, 11:09 AM

Alright RedR1 has taken a pass for a later unit and Scrubolio is MIA. And Zhe is out, so I will be getting the other two finished tanks to either the following people. So which one you guys need your catch tank now and who can wait another 3-4 weeks?

Jesse
aoc007

Also has anyone heard from Scrubolio?

silverfdturbo6port · 01-15-2012, 02:29 PM

I can wait and i will for sure pick one up.

FierceAlien · 01-16-2012, 08:16 PM

More waiting....

Prometheus · 01-18-2012, 01:14 PM

Kool-Aid!

afgmoto1978 · 01-19-2012, 03:16 PM

Alright got an update from welding repair guy, he said it will be repaired middle of next week. Turned out to be two SCRs, very big Diodes.

01-15-2012, 11:09 AM	#116
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon Posts: 381 Rep Power: 18	Alright RedR1 has taken a pass for a later unit and Scrubolio is MIA. And Zhe is out, so I will be getting the other two finished tanks to either the following people. So which one you guys need your catch tank now and who can wait another 3-4 weeks? Jesse aoc007 Also has anyone heard from Scrubolio? Last edited by afgmoto1978; 01-16-2012 at 02:07 PM.

01-15-2012, 02:29 PM	#117
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane Posts: 79 Rep Power: 15	I can wait and i will for sure pick one up. Last edited by silverfdturbo6port; 01-16-2012 at 12:58 AM.

12-08-2011, 10:25 PM	#107
aoc007 The Newbie Join Date: Jan 2009 Posts: 8 Rep Power: 0	Sounds good, I probably won't be on track again til after that, need some time to rebuild.

12-09-2011, 01:33 PM	#108
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	I'm not in the US right now, but I'll need to install it right when I get back, so if possible I'd like to have mine now. Dep next to my name means I paid the deposit right? I'm pretty sure I did, but I don't remember for sure, I'd have to go back and look at my paypal history. Thanks Adam!

12-10-2011, 10:24 AM	#110
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon Posts: 381 Rep Power: 18	I know I'm really sorry, really really frustrated about this. Will be taking the welder to a local welding repair shop. It's either and SCR or a board, they will have to put a scope on the output to see what going on.

01-12-2012, 06:15 AM	#112
FierceAlien The Newbie Join Date: Feb 2008 Posts: 17 Rep Power: 0	Checking in. Can we can an update please?

01-13-2012, 01:39 AM	#113
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane Posts: 79 Rep Power: 15	yes please updates. did you fix the ol tig welder?

01-15-2012, 05:27 AM	#115
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Cool, I'll be coming back around that time and I'm gonna need it quick lol. Thanks for the update!

01-16-2012, 08:16 PM	#118
FierceAlien The Newbie Join Date: Feb 2008 Posts: 17 Rep Power: 0	More waiting....

01-18-2012, 01:14 PM	#119
Prometheus Rotary Fan in Training Join Date: Feb 2008 Location: Portland, Oregon/ Vancouver, Washington Area Posts: 49 Rep Power: 0	Kool-Aid!

01-19-2012, 03:16 PM	#120
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon Posts: 381 Rep Power: 18	Alright got an update from welding repair guy, he said it will be repaired middle of next week. Turned out to be two SCRs, very big Diodes.