My mechanical preturbo water injection

dudemaaan · 09-21-2009, 01:27 PM

I'm considering that option too, I used to have my solenoid set at 3 psi, but it went through so much more water compared to being set at 8 psi. I would definitely need a larger tank for that, but I do have the room now that the battery is in the bins. The valve I have now is preset at 5 psi but I can turn it down to 3. Flow difference would be 425cc vs 500cc with a 3 psi decrease. I can always drill the nozzle a little to make up for that.

09-21-2009, 01:27 PM	#11
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 18	I'm considering that option too, I used to have my solenoid set at 3 psi, but it went through so much more water compared to being set at 8 psi. I would definitely need a larger tank for that, but I do have the room now that the battery is in the bins. The valve I have now is preset at 5 psi but I can turn it down to 3. Flow difference would be 425cc vs 500cc with a 3 psi decrease. I can always drill the nozzle a little to make up for that. __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!