Quote:
Originally Posted by TitaniumTT
Kewl.... @ 3bar it should flow about 67gph and about 53gph @ 72 psi
|
Ok, so if I break the seconds down into rough fractions (30 sec = .5, 45 sec = .75) then I math
(minute.fraction/5)*60 I com up with the following:
42.5/60= .7083 (rounded to .71). So the time for 43psi would be 5.71. Therefore:
(5.71/5
=1.142)x60= 68.52GPH
31.5/60= .525 (rounded to .53). So the time for 70psi would be 6.53.
Therefore:
(6.53/5
=1.306)x60= 78.36GPH
But.... I know that can't be right because if it were flowing a higher GPH @ higher psi than it would take less time.
Can't math =(