Fenda's uber garage Engine Build

[Fendamonky]

Originally Posted by TitaniumTT

Kewl.... @ 3bar it should flow about 67gph and about 53gph @ 72 psi

Ok, so if I break the seconds down into rough fractions (30 sec = .5, 45 sec = .75) then I math (minute.fraction/5)*60 I com up with the following:

42.5/60= .7083 (rounded to .71). So the time for 43psi would be 5.71. Therefore:
(5.71/5=1.142)x60= 68.52GPH

31.5/60= .525 (rounded to .53). So the time for 70psi would be 6.53.
Therefore:
(6.53/5=1.306)x60= 78.36GPH


But.... I know that can't be right because if it were flowing a higher GPH @ higher psi than it would take less time. Can't math =(