Quote:
Originally Posted by chibikougan
Does that pipe clear with the hood closed? Looks close...
|
It
is close (just like everything else in this 5 lb. sack
), but yes, it should. The hood bulges upward toward the middle with no inner structure, which is the only reason that my manifold clears. I'll see for absolute sure next time I trial fit the hood. It wouldn't be the first time I had to go back and re-think something.
edit: damn it Ransom, you got me worried and I had to go out and reinstall the hood to check it.
There
was a clearance issue. Not with the hood per se, but with the mounting tab for the hood prop. Chopped off the tab and it closes just fine.
Wheww! Good eye.
I do have another clearance issue with the thermostat housing pipe. It touches on the inner curve of the bend. I was planning to cut and swivel that to a more forward angle anyway. The outward angle is a bit extreme for this car and now that I know it touches the intake piping I'll definitely need to modify it to face further toward the front of the car.