Re-amemiya TYPE A 16bit ECU for SALE 500 USD

R-R-Rx7 · 04-06-2008, 02:50 PM

as the title sais

re-amemiya

type A ecu
low boost 0.9 bar and high boost 1.05 bar
amazing ecu pre programmed by re-amemiya.

reason for sale im going for motec as im trying to achieve over 700rwhp. this ECU served me well at 420hp with full exhaust, hf cat, intake and smic

500USD shipped anywhere in the world from Cyprus via EMS express track and confirm + insurance

R-R-Rx7 · 04-07-2008, 04:00 PM

$500 Ono

Mirage · 04-07-2008, 06:58 PM

What was your fuel set up with this?

Also any other mods?

R-R-Rx7 · 04-07-2008, 08:59 PM

my fuel was rich at 16.0 but I needed more air.. I didn't have intake nor exhaust. just the smic and the maxim works twin 68mm dp and made 280 on the wheels. when I installed the rest (cold air intake. re amemiya throttle full knightsports ti exhaust, high flow 300cpsi cat I made 420 on the 2002 twins

afterburn27 · 04-08-2008, 07:34 AM

I assume that you mean 420hp at the flywheel...

420hp at the wheels would be pretty much impossible with stock fuel and factory twins... In fact, I don't know if anyone has ever dyno'd more than 420whp on the twins.

R-R-Rx7 · 04-08-2008, 11:14 AM

Quote:

Originally Posted by afterburn27

I assume that you mean 420hp at the flywheel...

420hp at the wheels would be pretty much impossible with stock fuel and factory twins... In fact, I don't know if anyone has ever dyno'd more than 420whp on the twins.

420hp is flywheel hp ...however 420rwhp are on the wheels

thank you for the clarification, in case someone thought the opposite

Mirage · 04-08-2008, 08:02 PM

Sorry, what I meant was were you running stock fuel rails and injectors or did you have bigger injectors?

R-R-Rx7 · 04-08-2008, 09:30 PM

oh my bad then

stock injectors and rails!

R-R-Rx7 · 04-09-2008, 04:37 PM

need it gone in order to start the motec project

450 shipped

R-R-Rx7 · 04-10-2008, 03:36 PM

considerring offers

R-R-Rx7 · 04-16-2008, 11:12 AM

bump still for sale

04-07-2008, 06:58 PM	#3
Mirage Rotary Fan in Training Join Date: Mar 2008 Location: Santa Clara, CA Posts: 63 Rep Power: 18	What was your fuel set up with this? Also any other mods? __________________ Annand 93 CYM - I've been trying to sell it but I don't think I can part with it 03 M5 - Seriously, don't buy one

04-08-2008, 07:34 AM	#5
afterburn27 Rotary Fan in Training Join Date: Feb 2008 Posts: 58 Rep Power: 18	I assume that you mean 420hp at the flywheel... 420hp at the wheels would be pretty much impossible with stock fuel and factory twins... In fact, I don't know if anyone has ever dyno'd more than 420whp on the twins. __________________ '93 RX-7 (GT3574 track toy) '74 Triumph TR6 (weekend cruiser)

04-08-2008, 08:02 PM	#7
Mirage Rotary Fan in Training Join Date: Mar 2008 Location: Santa Clara, CA Posts: 63 Rep Power: 18	Sorry, what I meant was were you running stock fuel rails and injectors or did you have bigger injectors? __________________ Annand 93 CYM - I've been trying to sell it but I don't think I can part with it 03 M5 - Seriously, don't buy one

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-07-2008, 04:00 PM	#2
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 90 Rep Power: 18	$500 Ono

04-07-2008, 08:59 PM	#4
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 90 Rep Power: 18	my fuel was rich at 16.0 but I needed more air.. I didn't have intake nor exhaust. just the smic and the maxim works twin 68mm dp and made 280 on the wheels. when I installed the rest (cold air intake. re amemiya throttle full knightsports ti exhaust, high flow 300cpsi cat I made 420 on the 2002 twins

04-08-2008, 09:30 PM	#8
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 90 Rep Power: 18	oh my bad then stock injectors and rails!

04-09-2008, 04:37 PM	#9
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 90 Rep Power: 18	need it gone in order to start the motec project 450 shipped

04-10-2008, 03:36 PM	#10
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 90 Rep Power: 18	considerring offers

04-16-2008, 11:12 AM	#11
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 90 Rep Power: 18	bump still for sale