Electric Fan

rotaryguy481 · 02-28-2010, 02:47 PM

What kind of electric fan works good on a FC n/a

djmtsu · 02-28-2010, 04:46 PM

All different kinds. Shook Racing makes a sweet set up with an aluminum shroud. Spal makes great fans. Stay away from the auto parts cheapies.

Alot of FC guys will use a Ford Taurus or Escort e-fan. They fit the radiator great, and draw a small amount of amps.

rotaryguy481 · 02-28-2010, 04:59 PM

sweet thanks alot bro didn't know what to do lol

My5ABaby · 02-28-2010, 05:00 PM

http://www.aaroncake.net/rx-7/efaninstall.htm

88turboii · 02-28-2010, 07:01 PM

i run the single-speed taurus fan, havent had any problems with it

Dazed and Rotarded · 02-28-2010, 07:21 PM

You can use a dual from a audi with alittle trim.. The taurus work's great also like mentioned.

***TitaniumTT*** · 03-01-2010, 02:32 AM

The best fan for an N/A RX7 is the one that the factory fitted on there. I see toooooooo many efans installed incorrectly and they do more harm than good.

TS87FC3S · 03-01-2010, 03:35 AM

True but an efan helps clean up the engine bay, and used properly works as good if not better then stock.. Just stray away from cheepies either use a good fitting stock one off another car of spend the money for a good low amp efan

infernosg · 03-01-2010, 11:54 AM

Try to find a good (high flow rate, low amp draw) 15-16" puller, pick up a SPAL (or other) programmable thermoswitch and custom make a fan shroud out of aluminum, fiberglass, etc. to fit to fit over your radiator. That should be the makings of a good e-fan setup...

Polito Racing · 03-01-2010, 03:05 PM

Im running the later model mercury cougar fans setup in my car and works great. its a double fan setup and the shroud fitted prefectly on my radiator. It looks very clean.

knonfs · 03-03-2010, 11:19 PM

Flex a lite black magic fan, used for over decade back home (90F avg temps), and never had a problem.

02-28-2010, 02:47 PM	#1
rotaryguy481 Rotary Fan in Training Join Date: Jan 2010 Location: Fort Worth TX Posts: 74 Rep Power: 16	Electric Fan What kind of electric fan works good on a FC n/a

02-28-2010, 04:46 PM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	All different kinds. Shook Racing makes a sweet set up with an aluminum shroud. Spal makes great fans. Stay away from the auto parts cheapies. Alot of FC guys will use a Ford Taurus or Escort e-fan. They fit the radiator great, and draw a small amount of amps. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

02-28-2010, 05:00 PM	#4
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 2,377 Rep Power: 20	http://www.aaroncake.net/rx-7/efaninstall.htm __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

02-28-2010, 07:21 PM	#6
Dazed and Rotarded douche bag Join Date: Feb 2010 Location: Hell Posts: 109 Rep Power: 16	You can use a dual from a audi with alittle trim.. The taurus work's great also like mentioned. __________________ - chris xbox live - GraveConditions R.I.P paul gray - # 2 Last edited by Dazed and Rotarded; 02-28-2010 at 07:23 PM. Reason: typo..

03-01-2010, 02:32 AM	#7
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	The best fan for an N/A RX7 is the one that the factory fitted on there. I see toooooooo many efans installed incorrectly and they do more harm than good. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-28-2010, 04:59 PM	#3
rotaryguy481 Rotary Fan in Training Join Date: Jan 2010 Location: Fort Worth TX Posts: 74 Rep Power: 16	sweet thanks alot bro didn't know what to do lol

02-28-2010, 07:01 PM	#5
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	i run the single-speed taurus fan, havent had any problems with it

03-01-2010, 03:35 AM	#8
TS87FC3S Ask Me About My WANKEL!!! Join Date: Jan 2010 Location: Missouri Posts: 127 Rep Power: 16	True but an efan helps clean up the engine bay, and used properly works as good if not better then stock.. Just stray away from cheepies either use a good fitting stock one off another car of spend the money for a good low amp efan __________________ 1984 Rx7 Gs - stripped interior re speed coil overs, tokico blues, re speed crossmemeber and mustang rack, diamond star racing wheels 1988 Rx7 Se - Sold 1988 Rx7 GXL - Sold

03-01-2010, 11:54 AM	#9
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	Try to find a good (high flow rate, low amp draw) 15-16" puller, pick up a SPAL (or other) programmable thermoswitch and custom make a fan shroud out of aluminum, fiberglass, etc. to fit to fit over your radiator. That should be the makings of a good e-fan setup... __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

03-01-2010, 03:05 PM	#10
Polito Racing so you got pistons oh wow Join Date: Mar 2008 Location: Raeford NC Posts: 87 Rep Power: 18	Im running the later model mercury cougar fans setup in my car and works great. its a double fan setup and the shroud fitted prefectly on my radiator. It looks very clean. __________________ Polito Racing 2000 F-350 SD (Daily Driver) 2002 CBR 954RR (Back on the Road) 1987 RX-7 Turbo II(red bullet!!)

03-03-2010, 11:19 PM	#11
knonfs Rotary Fan in Training Join Date: Mar 2008 Posts: 86 Rep Power: 18	Flex a lite black magic fan, used for over decade back home (90F avg temps), and never had a problem.