January 2011 Nominations for Rotary of the Month

***ZGN*** · 12-23-2010, 02:13 PM

January 2011 is open for all rotary powered vehicles.

Only the first 10 entries that provide a minimum of 3 photos, interior, exterior and engine bay photo with description and mod list will be accepted.
Nominations will be closed on Jan 8th and voting will begin.

You can nominate anyone's rotary but you must be able to provide the requirements above.

Thanks for your nomination!

Proxy One · 12-29-2010, 09:27 PM

Ill throw my Rx2 in the runnings.

1972 Herschel Orange Rx2 Coupe
1983 12a Engine with a SA 5-Spd transmission
M'Spec Aluminum Radiator with Dual electric fans
Rx4 Brake Master Cylinder
Replaced Seats with black seats

NoDOHC · 12-30-2010, 08:01 PM

Is that car all original? The list of mods would make it seem so.

Looks good, I like old school.

RotorDad · 12-30-2010, 09:19 PM

Quote:

Originally Posted by NoDOHC

Is that car all original? The list of mods would make it seem so.

Looks good, I like old school.

I would say not all original, due to the fact he stated it had a 13b from an 83. I like the car makes me want to do an old school RX.

Excuse the above meant to write 12a, brain stopped functioning as I was typing!

WE3RX7 · 12-31-2010, 09:47 AM

12A from 1983 - no 13Bs in FBs back then. Its not all original with the RX7 engine and the RX4 brake cylinder, etc.

RotorDad · 12-31-2010, 10:37 AM

Woops was typing fast, I meant 12a. Thanks WE3, good catch.

NoDOHC · 01-01-2011, 05:42 PM

Sorry, I meant the body (all original), not the mechanicals. I should have said as much.

Obviously the mod list indicated that the mechanicals had been changed.

If the body survived that long without work, that is impressive.

t_g_farrell · 01-02-2011, 09:34 AM

I've seen this car in person. Looks all stock from the outside. A very nice
survivor.

Jeremy, my wifes' comment when she saw it at Crits was "It's cute!"

Proxy One · 01-04-2011, 02:43 PM

Yeah the body is all original and original paint with the exception to the passenger rear quarter has been resprayed at some point.

***ZGN*** · 01-04-2011, 08:17 PM

So should I just declare you the winner by default or does anyone else want to enter?

RotorDad · 01-04-2011, 10:32 PM

Could give it till the end of the week see if any random entries turn up.

Kane · 01-04-2011, 10:32 PM

I dunno man, I really like the RX2!!!

Bryan@BNR · 01-04-2011, 11:55 PM

I can put my wifes car in the "car of the month". I will have to get an interior picture and engine bay pic later. Here is the outside picture...

94 MB FD

extend port engine with all OE parts (ported by myself,assembled by Stephen White with some assistance

.)

BNR Stage 3 sequential twin turbocharger upgrades

Full 3" exhaust with Magnaflow muffled mid pipe and RB dual tip muffler

Custom SMIC upgrade with custom air duct extension

Custom intercooler piping with Greddy elbow

Type S BOV

Power FC w/ Commander

850 primary injectors/1200CC secondary injectors

Supra Nippondenso pump

Car made 329 RWHP at 14 psi on stock twins and stock engine with stock fuel system a couple years ago. On crappy tires and stock slipping clutch it went a 13.0 with a 2.2 60 ft at 114 mph. Redynoing at the end of this month. Goal with the car is 375 RWHP sequential at 15-16 psi on pump fuel.

Bryan@BNR · 01-05-2011, 12:03 AM

I found that RX2! It was in a junk yard in Pell City AL. When I saw it, it looked perfect!

NoDOHC · 01-05-2011, 08:44 PM

It may take some time for this section of the forum to become popular again...

Bryan, your pictures didn't come through.

FD vs RX2 is an interesting competition...

12-23-2010, 02:13 PM	#1
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	January 2011 Nominations for Rotary of the Month January 2011 is open for all rotary powered vehicles. Only the first 10 entries that provide a minimum of 3 photos, interior, exterior and engine bay photo with description and mod list will be accepted. Nominations will be closed on Jan 8th and voting will begin. You can nominate anyone's rotary but you must be able to provide the requirements above. Thanks for your nomination! __________________ Kevin

12-29-2010, 09:27 PM	#2
Proxy One Victory Is Mine Join Date: Feb 2008 Location: Suwanee GA Posts: 428 Rep Power: 18	Ill throw my Rx2 in the runnings. 1972 Herschel Orange Rx2 Coupe 1983 12a Engine with a SA 5-Spd transmission M'Spec Aluminum Radiator with Dual electric fans Rx4 Brake Master Cylinder Replaced Seats with black seats __________________ www.dealsgaprotaryrally.com 1994 Rx7 White 2001 RZ GT35R'd 1972 Rx2 Orange Coupe 5spd 2006 STi 1986 Buick GN Last edited by Proxy One; 12-29-2010 at 09:32 PM.

12-30-2010, 08:01 PM	#3
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 18	Is that car all original? The list of mods would make it seem so. Looks good, I like old school. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

12-31-2010, 10:37 AM	#6
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	Woops was typing fast, I meant 12a. Thanks WE3, good catch. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

01-01-2011, 05:42 PM	#7
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 18	Sorry, I meant the body (all original), not the mechanicals. I should have said as much. Obviously the mod list indicated that the mechanicals had been changed. If the body survived that long without work, that is impressive. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

12-31-2010, 09:47 AM	#5
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	12A from 1983 - no 13Bs in FBs back then. Its not all original with the RX7 engine and the RX4 brake cylinder, etc.

01-02-2011, 09:34 AM	#8
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC Posts: 757 Rep Power: 0	I've seen this car in person. Looks all stock from the outside. A very nice survivor. Jeremy, my wifes' comment when she saw it at Crits was "It's cute!" __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

01-04-2011, 02:43 PM	#9
Proxy One Victory Is Mine Join Date: Feb 2008 Location: Suwanee GA Posts: 428 Rep Power: 18	Yeah the body is all original and original paint with the exception to the passenger rear quarter has been resprayed at some point. __________________ www.dealsgaprotaryrally.com 1994 Rx7 White 2001 RZ GT35R'd 1972 Rx2 Orange Coupe 5spd 2006 STi 1986 Buick GN

01-04-2011, 08:17 PM	#10
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	So should I just declare you the winner by default or does anyone else want to enter? __________________ Kevin

01-04-2011, 10:32 PM	#11
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	Could give it till the end of the week see if any random entries turn up. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

01-04-2011, 10:32 PM	#12
Kane All about the O2 Join Date: Sep 2008 Posts: 295 Rep Power: 18	I dunno man, I really like the RX2!!! __________________ My 2007 Turbocharged RX8

01-04-2011, 11:55 PM	#13
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 Posts: 302 Rep Power: 18	I can put my wifes car in the "car of the month". I will have to get an interior picture and engine bay pic later. Here is the outside picture... 94 MB FD extend port engine with all OE parts (ported by myself,assembled by Stephen White with some assistance .) BNR Stage 3 sequential twin turbocharger upgrades Full 3" exhaust with Magnaflow muffled mid pipe and RB dual tip muffler Custom SMIC upgrade with custom air duct extension Custom intercooler piping with Greddy elbow Type S BOV Power FC w/ Commander 850 primary injectors/1200CC secondary injectors Supra Nippondenso pump Car made 329 RWHP at 14 psi on stock twins and stock engine with stock fuel system a couple years ago. On crappy tires and stock slipping clutch it went a 13.0 with a 2.2 60 ft at 114 mph. Redynoing at the end of this month. Goal with the car is 375 RWHP sequential at 15-16 psi on pump fuel.

01-05-2011, 12:03 AM	#14
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 Posts: 302 Rep Power: 18	I found that RX2! It was in a junk yard in Pell City AL. When I saw it, it looked perfect!

01-05-2011, 08:44 PM	#15
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 18	It may take some time for this section of the forum to become popular again... Bryan, your pictures didn't come through. FD vs RX2 is an interesting competition... __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)