What is a TII driveline worth?

sk8world · 12-01-2009, 06:22 PM

Found local guy that wants to unload a TII motor and manual tranny. Said both were running condition when they came out of the car. Whats a fair price on this? I can get it for $500?

85rx-7gsl-se · 12-01-2009, 06:29 PM

JDM engine and trans go for ~$1500 shipped. Used TII trans usually go for ~$200 alone so $500 sounds like a really good deal as long neither has major problems.

dregg100 · 12-01-2009, 06:54 PM

yeah, thats a steal if its a long block. get comp numbers since it still has a tranny attached. and pm me if you want to make a little money. i need a good used Tii motor...

***TitaniumTT*** · 12-01-2009, 06:54 PM

Jump on that. You're getting it at 25% what it's worth assuming it is in running condition, the tranny shifts, compression is good etc etc etc. Get the ECU, wiring harness, oil cooler, downpipe etc etc and sell it to some guy who wants to do a turbo swap. Double you're money and make someone else incredibly happy as well.

djmtsu · 12-01-2009, 07:06 PM

Quote:

Originally Posted by sk8world

Found local guy that wants to unload a TII motor and manual tranny. Said both were running condition when they came out of the car. Whats a fair price on this? I can get it for $500?

Go ahead and give him my number.

***TitaniumTT*** · 12-01-2009, 07:12 PM

Turbo Rotary Miata?

need RX7 · 12-01-2009, 07:36 PM

I'll PM you my address for when you ship it to me

85rx-7gsl-se · 12-01-2009, 09:42 PM

Quote:

Originally Posted by dregg100

yeah, thats a steal if its a long block. get comp numbers since it still has a tranny attached. and pm me if you want to make a little money. i need a good used Tii motor...

And I will take the trans lol

djmtsu · 12-02-2009, 07:57 AM

Quote:

Originally Posted by TitaniumTT

Turbo Rotary Miata?

Damn you!

sk8world · 12-02-2009, 03:56 PM

So I am picking it up Thursday. Its a complete pullout from alt-to IC to tranny. HAs 143k and was running when came out. He said it started smoking (guessing oil control rings) so he had Hinson do a swap for him. I tried to low ball him but he wouldnt go for it..
This will be my core for the rx3..

***TitaniumTT*** · 12-02-2009, 07:03 PM

You tried to low-ball the $500

NICE.... meh, $500 is still a steal and a half if the housing/rotors are still in good shape.

RotaryRoadRage · 12-02-2009, 07:29 PM

Hell , I might sell my s5 tii block , harness and ecu soon.. Glad I seen this lol atleast now I have a idea how to price this.. And no.. Not 500 buck's. Good find by the way..

Chris

sk8world · 12-02-2009, 08:23 PM

Quote:

Originally Posted by TitaniumTT

You tried to low-ball the $500

NICE.... meh, $500 is still a steal and a half if the housing/rotors are still in good shape.

I know.. right... What's even funnier is I told him I was next to him going down a certain road last year and gave him thumbs up, I was driving my C2 996 porsche.. oops... He wasnt going to let me take a $1 off after that.

HDP · 12-03-2009, 12:56 PM

Quote:

Originally Posted by sk8world

I know.. right... What's even funnier is I told him I was next to him going down a certain road last year and gave him thumbs up, I was driving my C2 996 porsche.. oops... He wasnt going to let me take a $1 off after that.

Mike you should know better... go to a business deal looking like you're on your last dime, not telling stories about your weekend drives in you Porsche...

sk8world · 12-10-2009, 08:14 PM

So I went and saw the motor and it looks VERY clean. I didnt have my compression tester with me so I am going back to test it and then buy it. I just want the short block so I will have many parts for sale off it like ac, manifold,turbo, intake, tb etc...

12-01-2009, 06:22 PM	#1
sk8world 600rwhp club member. Join Date: Mar 2008 Posts: 551 Rep Power: 18	What is a TII driveline worth? Found local guy that wants to unload a TII motor and manual tranny. Said both were running condition when they came out of the car. Whats a fair price on this? I can get it for $500? __________________ 6.? @ 11? drag pass http://www.youtube.com/watch?v=9wfxT2RMr7c

12-01-2009, 06:54 PM	#3
dregg100 Rotary Fanatic Join Date: Feb 2008 Posts: 432 Rep Power: 18	yeah, thats a steal if its a long block. get comp numbers since it still has a tranny attached. and pm me if you want to make a little money. i need a good used Tii motor... __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

12-01-2009, 06:54 PM	#4
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Jump on that. You're getting it at 25% what it's worth assuming it is in running condition, the tranny shifts, compression is good etc etc etc. Get the ECU, wiring harness, oil cooler, downpipe etc etc and sell it to some guy who wants to do a turbo swap. Double you're money and make someone else incredibly happy as well. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-01-2009, 07:12 PM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Turbo Rotary Miata? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-01-2009, 07:36 PM	#7
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	I'll PM you my address for when you ship it to me __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

12-02-2009, 03:56 PM	#10
sk8world 600rwhp club member. Join Date: Mar 2008 Posts: 551 Rep Power: 18	So I am picking it up Thursday. Its a complete pullout from alt-to IC to tranny. HAs 143k and was running when came out. He said it started smoking (guessing oil control rings) so he had Hinson do a swap for him. I tried to low ball him but he wouldnt go for it.. This will be my core for the rx3.. __________________ 6.? @ 11? drag pass http://www.youtube.com/watch?v=9wfxT2RMr7c

12-02-2009, 07:03 PM	#11
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	You tried to low-ball the $500 NICE.... meh, $500 is still a steal and a half if the housing/rotors are still in good shape. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-02-2009, 07:29 PM	#12
RotaryRoadRage Rotary Fanatic Join Date: Jun 2008 Posts: 244 Rep Power: 17	Hell , I might sell my s5 tii block , harness and ecu soon.. Glad I seen this lol atleast now I have a idea how to price this.. And no.. Not 500 buck's. Good find by the way.. Chris __________________ 89 TII black on black Gamer tag - graveconditions

12-10-2009, 08:14 PM	#15
sk8world 600rwhp club member. Join Date: Mar 2008 Posts: 551 Rep Power: 18	So I went and saw the motor and it looks VERY clean. I didnt have my compression tester with me so I am going back to test it and then buy it. I just want the short block so I will have many parts for sale off it like ac, manifold,turbo, intake, tb etc... __________________ 6.? @ 11? drag pass http://www.youtube.com/watch?v=9wfxT2RMr7c