GSL-SE issues

11-03-2008, 10:25 AM

pull the fuel pump fuse (BOTH OF THEM from the strip on the drivers fender)

pull out the plugs and crank the engine over for atleast 10 seconds. do this a few times till there is no more misting comming out of the plug holes.

add a touch of engine oil into the leading plug holes (both rotors)

put the plugs back in (make sure they are not wet, clean with a lighter)
put the fuses back in and crank it over

that should help deflood it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

11-03-2008, 10:25 AM	#3
SpooledupRacing Guest Posts: n/a	pull the fuel pump fuse (BOTH OF THEM from the strip on the drivers fender) pull out the plugs and crank the engine over for atleast 10 seconds. do this a few times till there is no more misting comming out of the plug holes. add a touch of engine oil into the leading plug holes (both rotors) put the plugs back in (make sure they are not wet, clean with a lighter) put the fuses back in and crank it over that should help deflood it.