who makes a good wideband? - Rotary Car Club

Whizbang who makes a good wideband? 11-01-2009, 06:55 PM

C. Ludwig Not sure if any of the MS... 11-01-2009, 07:29 PM

NoDOHC I have a two-year-old, 30,000... 11-01-2009, 08:07 PM

RotaryProphet The Megasquirt, as it stands,... 11-01-2009, 08:47 PM

Whizbang i hear alot of people using... 11-02-2009, 09:26 PM

RotaryProphet You can pick up a replacement... 11-12-2009, 10:09 AM

FC3S Murray Innovate has been GREAT for... 11-06-2009, 04:13 PM

NoDOHC I don't know what happened, I... 11-09-2009, 08:12 PM

moremazda I'm on the Innovate hating... 11-12-2009, 09:10 AM

C. Ludwig Actually Innovate drives the... 11-12-2009, 05:53 PM

TitaniumTT Dave filled me in on that... 11-12-2009, 10:48 AM

C. Ludwig I just bought a Bosch sensor... 11-12-2009, 05:51 PM

TitaniumTT :rofl: Nice. I like very... 11-12-2009, 06:36 PM

TitaniumTT I'm going to make a few... 08-08-2010, 05:26 PM

ducktape I've only had the chance to... 08-08-2010, 06:17 PM

RETed I would never use anything... 04-07-2011, 10:12 PM

RICE RACING http://www.ecm-co.com/category... 04-07-2011, 11:11 PM

RETed Funny, you mention them... I... 04-08-2011, 06:21 AM

RICE RACING I keep going on and on like a... 04-08-2011, 04:18 PM

RotorDad I have the Innovative which... 08-08-2010, 08:37 PM

Nev i have an aem, has worked... 08-23-2010, 07:45 PM

RotorDad Works for some & doesn't for... 08-24-2010, 12:16 PM

dudemaaan I run the innovate lc1 and... 08-24-2010, 09:42 AM

730RWHP12A AEM, most bang for your buck! 08-24-2010, 07:15 PM

NoDOHC The reason that I went with... 08-24-2010, 09:20 PM

AnthonyNYC A while back I bought the... 10-18-2010, 01:33 AM

speedjunkie I've been using Innovate... 10-21-2010, 12:18 AM

speedjunkie OK, well I'm slowly joining... 12-08-2010, 04:34 PM

Waffles I used an AEM to tune a... 12-15-2010, 09:42 PM

rx71king i have bin using fast... 12-15-2010, 11:44 PM

RICE RACING I use a Neko AF700 as... 12-16-2010, 12:07 AM

sen2two From what everyone is... 12-16-2010, 09:33 AM

RICE RACING Yes, The innovate is a toy... 12-16-2010, 03:22 PM

djmtsu Lol. You are wayyyy toooo... 04-06-2011, 12:00 PM

j9fd3s yes. mine likes to pop one... 04-18-2011, 08:36 PM

speedjunkie Just to update, as it turns... 12-16-2010, 09:47 AM

speedjunkie Well when my engine blew in... 04-06-2011, 11:17 AM

NoDOHC Unfortunately, this is the... 04-06-2011, 10:24 PM

djmtsu I'm an FB owner now, so I... 04-07-2011, 09:17 PM

speedjunkie ^The only FC owner I can... 04-07-2011, 12:23 AM

C. Ludwig They're just a phone call... 04-07-2011, 08:57 PM

Mazdabater For the record I've spent... 04-08-2011, 03:27 AM

djmtsu Well then I guess I should go... 04-08-2011, 06:45 AM

vex This thread makes me laugh. 04-08-2011, 08:03 AM

speedjunkie Well it looks like the... 04-08-2011, 02:40 PM

speedjunkie Actually my problems have yet... 04-19-2011, 01:44 AM

speedjunkie The one they shipped with... 04-28-2011, 02:27 PM

vex +1, but mine is probably just... 04-28-2011, 02:43 PM

Raksj04 I was hoping that this thread... 12-17-2011, 11:13 AM

12-16-2010, 09:33 AM	#23
sen2two KTEC Join Date: Jan 2009 Posts: 642 Rep Power: 0	From what everyone is saying... It seems to be that the sensors are the problem, not the actual wideband hardware. I have the Innovate LM-1, which I only have in the car when I tune it. I also only run pump gas in the car, and a bit of water/meth. Which gives cooler exhaust temps. So the sensor shouldnt really be a problem for me. Does anyone have a problem with the actual Innovate set-up that dosnt involve the sensor? Can you upgrade any one of the above listed "better" sensors to the Innovate set-up? __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2