1982 GS! - Its Getting Close!!!

Whizbang · 09-07-2008, 01:25 PM

So the FPR is installed, but the one fitting is still leaking, so i need to go tighten that. Once that is done, i declare the fuel system done.

Also the driver's side Isuzu seat is install and seems pretty nice. Adj. in many ways, the best being the torso bolsters. Just have to finish tinkering with the pass. side setup. I got lucky with the driver's side, the isuzu rails didnt take much to make work. The Passenger side is using the FB rails.

I still need to do something about the batt. i need a new one anyway since i cant find one that is a "known working" battery to check to make sure the start is good, since i can't get it to crank over. Just clicks alot.

09-07-2008, 01:25 PM	#11
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	So the FPR is installed, but the one fitting is still leaking, so i need to go tighten that. Once that is done, i declare the fuel system done. Also the driver's side Isuzu seat is install and seems pretty nice. Adj. in many ways, the best being the torso bolsters. Just have to finish tinkering with the pass. side setup. I got lucky with the driver's side, the isuzu rails didnt take much to make work. The Passenger side is using the FB rails. I still need to do something about the batt. i need a new one anyway since i cant find one that is a "known working" battery to check to make sure the start is good, since i can't get it to crank over. Just clicks alot. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook