flooding out FC3S4 N/A

Shadow24v · 04-24-2009, 08:18 AM

well, for one i saw that the hose connecting the primary fuel rail to the secondary has a nasty kink in it. That might be causing the issue.

As for the varnished fuel, is it that hard to drop the tank? it looked like 2 straps and it'd come right down.

AFAIK it has all the emissions stuff still attached, its a relatively untouched rx-7

Wile i can't spot any missing vacuum lines it doesn't mean that some of them might be bad.

the leading coils checked out and it DID run, the issue i believe is in the fueling side.

I have a set of known good injectors, the secondaries were swapped by the seller but not the primaries. I want to swap them after seeing the fuel i pulled out, but i don't know what gasket to get to replace the one between both upper and lower intakes

04-24-2009, 08:18 AM	#11
Shadow24v Rotary Fan in Training Join Date: Feb 2009 Posts: 69 Rep Power: 17	well, for one i saw that the hose connecting the primary fuel rail to the secondary has a nasty kink in it. That might be causing the issue. As for the varnished fuel, is it that hard to drop the tank? it looked like 2 straps and it'd come right down. AFAIK it has all the emissions stuff still attached, its a relatively untouched rx-7 Wile i can't spot any missing vacuum lines it doesn't mean that some of them might be bad. the leading coils checked out and it DID run, the issue i believe is in the fueling side. I have a set of known good injectors, the secondaries were swapped by the seller but not the primaries. I want to swap them after seeing the fuel i pulled out, but i don't know what gasket to get to replace the one between both upper and lower intakes