trouble removing old bolts please help

JustJeff · 12-05-2010, 04:24 AM

What I did with PB Blaster when I was pulling my motor was hit the problem bolts and let them soak for a couple days. I had time till the motor was coming out so I'd hit them once or twice a day for a couple days. When I finally got to pulling the motor the bolts came loose with no problems.

Not sure if that advice helps with seized bolts, but if you have time to wait then it certainly won't hurt anything.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-05-2010, 04:24 AM	#8
JustJeff RCC Contributor Join Date: Mar 2008 Posts: 505 Rep Power: 18	What I did with PB Blaster when I was pulling my motor was hit the problem bolts and let them soak for a couple days. I had time till the motor was coming out so I'd hit them once or twice a day for a couple days. When I finally got to pulling the motor the bolts came loose with no problems. Not sure if that advice helps with seized bolts, but if you have time to wait then it certainly won't hurt anything.