another 20b thread

1twistedrx7 · 01-10-2011, 10:29 PM

Definitely going to be at the rally this year Phil. If things go right we will have a couple 20b's going.

Started my partner Bobby's 20b build today also he is the master welder and fabricator behind our projects.

T-von · 01-11-2011, 04:04 PM

Looking good! Nice approach for the modified subframe. I can see how this will keep the factory rigidity once the rear portion is completed.

By the way, I have a nice thick piece of aluminum on the way so I can remake my oil pan. I rather not shorten the factory one.

Trey,

01-10-2011, 10:29 PM	#1
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 Posts: 411 Rep Power: 0	Definitely going to be at the rally this year Phil. If things go right we will have a couple 20b's going. Started my partner Bobby's 20b build today also he is the master welder and fabricator behind our projects. __________________ Rotary Performance Motors(DGRRXI)sponsor 2011 RPM sale complete rebuilt your choice ported or bridge port short block W/RA seals 2300 no core required plus shipping. we now offer powder coating! 93 mb touring patring out sold! 93 vr touring sold 93vr died violently 93 ssm touring sold 93 black 20b project and a lot of money! underestimated !! http://rotorfest.lefora.com Last edited by 1twistedrx7; 01-10-2011 at 11:01 PM.

01-11-2011, 04:04 PM	#2
T-von Rotary Perfection Join Date: Dec 2010 Posts: 5 Rep Power: 0	Looking good! Nice approach for the modified subframe. I can see how this will keep the factory rigidity once the rear portion is completed. By the way, I have a nice thick piece of aluminum on the way so I can remake my oil pan. I rather not shorten the factory one. Trey, Last edited by T-von; 01-11-2011 at 04:08 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode