no drill fc3s dual gauge pod

Pete_89T2 · 06-08-2011, 07:47 PM

If you are looking for new stock A-pillars, I'd suggest calling the parts dept. at Malloy Mazda (Woodbridge, VA), and ask for Ray Crowe. He's the parts manager there, and takes good care of the RX-7/rotary community.

As for A-pillar dual gauge pods that mount with clips, I don't know of any. You might be able to get creative and mount them with double-sided adhesive tape, but that may be just as destructive as drilling holes. Probably a moot point anyway, as you'll no doubt have to drill a hole or two in the pillar to run your gauge wires.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-08-2011, 07:47 PM	#1
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD Posts: 874 Rep Power: 16	If you are looking for new stock A-pillars, I'd suggest calling the parts dept. at Malloy Mazda (Woodbridge, VA), and ask for Ray Crowe. He's the parts manager there, and takes good care of the RX-7/rotary community. As for A-pillar dual gauge pods that mount with clips, I don't know of any. You might be able to get creative and mount them with double-sided adhesive tape, but that may be just as destructive as drilling holes. Probably a moot point anyway, as you'll no doubt have to drill a hole or two in the pillar to run your gauge wires.