13B Power @ 1 bar absolute pressure, to see what you might have if you MAN UP!

RICE RACING · 11-30-2012, 07:14 PM

Racing Beats full Peripheral Port Turbo's are around that same ~270bhp level btw. But to attain that you need a full open exhaust! not practical even on race tracks. I listed a few of partial pp's in the first post, worst or just a bit over compared to RR street port. so you can see there is not much in it really at end of the day once you have a decent street ported motor.

There is a big gain from small stock ports, but how much power do you want

190 odd bhp level to 240bhp~!

11-30-2012, 07:14 PM	#8
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	Racing Beats full Peripheral Port Turbo's are around that same ~270bhp level btw. But to attain that you need a full open exhaust! not practical even on race tracks. I listed a few of partial pp's in the first post, worst or just a bit over compared to RR street port. so you can see there is not much in it really at end of the day once you have a decent street ported motor. There is a big gain from small stock ports, but how much power do you want 190 odd bhp level to 240bhp~! __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration Last edited by RICE RACING; 12-01-2012 at 04:21 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode