|
Show your rotary car build up. Show off your Rotary Car build! |
|
Thread Tools | Display Modes |
![]() |
#11 |
Rotary Fanatic
Join Date: Jun 2012
Location: Edmonton, AB
Posts: 179
Rep Power: 14 ![]() |
I said I'd post pics so here they are.
I tried taking off the brake booster but it was way more than i had bargained for so i just removed the master cylinder and called er a day. And wrapped up the remaining sensors: ![]() I didn't end up making the brackets for the boxes because I found a DIY a member on the other forum posted about moving them to this location and his brackets are much simpler. But I didn't have the materials for his design so I will have to get those. Here is where the main box is going though. Then the others will go behind it: ![]() Bye bye antenna! You can't really see it but around this area on the car there are a few dings from hail which will be filled/pulled.: ![]() Shop shot: ![]() Here is an engine my friend just finished building for his project. Upon looking at the picture, maybe i should have taped up his ports for him.. Looks pretty good though ![]() And I think these turbos actually came off my car originally and he is going to use them for his car: ![]() Messy workbench. Not sure what the things on the left of the picture would be used for.. ![]() Got a little fancy with the photography in the one. Lifted myself up with the crane and put my life on the line for this shot. ![]() jk.. just went upstairs. The engine is not mine: ![]() Was pleased to find this when i got home.. and didn't even have to pay duties! Thanks to not using UPS.. ![]() Got a bit excited and unboxed it on the kitchen counter ![]() MMM new parts ![]() And lastly, the abs delete kit: ![]() Not sure the lines to the rear brakes will be long enough since my MC is on the right side. But i guess we'll have to see.
__________________
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|