FC3S Power Window system rebuild

[RETed]

Originally Posted by knonfs

NICE Ted, thanks for sharing!!

Thanx guys!

BTW - After removing the clear plastic liner from the door, how in the world did you remove/clean all of the glue/goo used to secure the liner to the door?

There's no easy solution...

If you're serious about taking it off, this is what I recommend:
1) Scrape as much as you can with plastic / teflon spatula, putty knife, etc.
2) Use mineral spirits, WD-40, kerosene, etc. to remove the rest of the residue.

You should try and keep that plastic sheet in there, if possible.
With the plastic moisture barrier, it keeps moisture from seeping your door panel, which has pressed wood pulp - i.e. masonite.
Without the plastic, you rish ruining your door panel.
If your original plastic sheet is dying, try and replace it - Home Depot, Lowe's, etc. carry plastic moisture barrier sheeting if needed.


-Ted