RXtacy's slooow build up

[rotarynerdette]

Those welds have come a long way.

[RXtacy]

Originally Posted by rotarynerdette

Those welds have come a long way.

You're telling me! Looking back is pretty embarrassing now, but you gotta start somewhere.

[chibikougan]

Originally Posted by RXtacy

You're telling me! Looking back is pretty embarrassing now, but you gotta start somewhere.

Well with the pro shops manifolds showing up looking much worse even when they half assed polish their undercut ... So I would not be embarrassed one bit!

[rotarynerdette]

Originally Posted by chibikougan

Well with the pro shops manifolds showing up looking much worse even when they half assed polish their undercut ... So I would not be embarrassed one bit!

Did you see the new lastest parts they have sent out.... it gets worse.

[RXtacy]

Originally Posted by rotarynerdette

I just end up with aluminum penises

Ain't nothing wrong with that
This was the beginning of my practice sheet.

Originally Posted by rotarynerdette

Did you see the new lastest parts they have sent out.... it gets worse.

Who we talking about?

[GySgtFrank]

Originally Posted by RXtacy

This was the beginning of my practice sheet.

I'll make sure and bring along the MIG to DGRR and weld that on your balls for you ... seeing as you're so proud of it and all.

[rotarynerdette]

Originally Posted by RXtacy

Ain't nothing wrong with that
This was the beginning of my practice sheet.

Originally Posted by GySgtFrank

I'll make sure and bring along the MIG to DGRR and weld that on your balls for you ... seeing as you're so proud of it and all.

[rotarynerdette]

Originally Posted by RXtacy

You're telling me! Looking back is pretty embarrassing now, but you gotta start somewhere.

That is very true, I can't even keep a steady bead yet.

[RXtacy]

Originally Posted by rotarynerdette

That is very true, I can't even keep a steady bead yet.

Other than the basic mechanics of torch angle, and keeping the filler in the shield gas the biggest lesson I learned was fit up is key. Tight fit up makes a good weld. I found running beads repetitively on an aluminum sheet helpful in the beginning to get the basics, then just stick as much scrap together as you can get your hands on. Keep at it, it's a great skill to have

[rotarynerdette]

Originally Posted by RXtacy

Other than the basic mechanics of torch angle, and keeping the filler in the shield gas the biggest lesson I learned was fit up is key. Tight fit up makes a good weld. I found running beads repetitively on an aluminum sheet helpful in the beginning to get the basics, then just stick as much scrap together as you can get your hands on. Keep at it, it's a great skill to have

I just end up with aluminum penises

[chibikougan]

Originally Posted by rotarynerdette

I just end up with aluminum penises

Haha the first thing I ever Tiged was an AL cock n ballz..