|
|||||||
| Show your rotary car build up. Show off your Rotary Car build! |
|
|
Thread Tools | Display Modes |
|
|
#11 |
|
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21 ![]() |
items in red are completed!
PHASE 1 - Getting the car running! A. Fix coolant leak issues (have to verify with the engine running) B. Finish exhaust C. Install RE Speed Kit for front brakes. D. Need lug nuts for vert wheels E. Install shocks in rear once second shock (finally) arrives. F. Tighten all suspension bolts in rear. G. Need new batt. Temp. use of old miata may work pending start issue. H. Fix start "not cranking" issue. I. Add ground cabling here and there. J. Install pass. side Isuzu seat. K. acquire and install E-Fan. now i would have the exhaust finished too, but something became misaligned, so i need to redo it... i am also concerned about the possibility that the manifold is STILL leaking coolant. There is also a 4.78 equipped 3rd member in the car. I want to see what the open diff is like for one, and for two, i want to rebuild the limited slip unit i have. No sense doing it twice.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook Last edited by Whizbang; 09-21-2008 at 12:08 PM. |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|