RX7 FC 12V Switched Ignition Source

[RX7powered]

Hello. Before I begin, do know that this swap is my first time to wire and I've learned everything by searching, but I'm stumped about something and I didn't know where else to turn besides the main forum that knows so much about these cars.

For my electric fans and fuel pump, I've used the AAS connector and your typical relay setup to power these items.

The Problem: I'm trying to get 12v switched ignition power to three 10-12 gauge wires for my 1JZ harness; they power TPS, injectors, and igniter. I was thinking main relay but I wasn't sure and didn't want to hack anything up. If someone has an intelligent suggestion on how to power the essentials in my harness, please advise me; and I thank you for your knowledge.


Disclaimer: I have been a big fan of the rotary engine for a long time and still own my rotary engine, but I wanted to do something different and be able to show that I have learned things and applied those things to a project.