RX7 FC 12V Switched Ignition Source

[RETed]

You're talking about running those wires through a relay?

Do you still have the "power" harness in the engine bay?


-Ted

[RX7powered]

Originally Posted by RETed

You're talking about running those wires through a relay?

Do you still have the "power" harness in the engine bay?


-Ted

What I would like to do is use a distribution block and power it with 12v switched ignition -- he only wires that I know of that provide this are the AAS connector wire and the black/white wire coming from the green connector on the front harness. I didn't think those small wires would be enough to reliably power the three wires that I need to power with 12v switched ignition. That being said, I do not know much about wiring, just what I have learned by reading a few guides on how to set things up here and there.

To give you an idea of my setup, I have everything but the engine harness on the car. Right now, I have a battery relocation using the guide listed on (your) FC3Spro.com.

Thanks for your time in this issue, I am very grateful.