Nagisa Auto FC3S/FD3S Fender Braces - Page 3

***TitaniumTT*** · 11-19-2009, 01:24 PM

Pic-Tease

2gslse · 11-19-2009, 04:24 PM

I can get a FB clip. I have one here at the house stripped down ready for the crusher I was going to sawzall the front off anyway

WE3RX7 · 11-19-2009, 04:51 PM

I missed out on this GB too - just bad timing around the wedding, but definitely still interested in a set. Brian this would be a good product to help launch a company if you were into that sort of thing

especially if made for the FC and FB...

***TitaniumTT*** · 11-19-2009, 05:40 PM

Yeah, that whole partner up and start a company has crossed my mind once or twice...... a day. We're a little behind with the planning of the launch, time is just slipping with everything that's been going on but it'll definately happen.

If I were to build something like that, I'd do it for myself and then keep the templates and jig the sucker so I could just crank them out if need be. I still prefer to have the car infront of me though. There's so many things that can be just slightly different from car to car that could give a great product and perfect fitment on one car, a bad rep by not fitting on another car that is just ever so slightly tweaked. Whether in an accident or not, cars do bend.

EJayCe996 · 11-19-2009, 07:59 PM

Quote:

Originally Posted by TitaniumTT

Yeah, that whole partner up and start a company has crossed my mind once or twice...... a day. We're a little behind with the planning of the launch, time is just slipping with everything that's been going on but it'll definately happen.

If I were to build something like that, I'd do it for myself and then keep the templates and jig the sucker so I could just crank them out if need be. I still prefer to have the car infront of me though. There's so many things that can be just slightly different from car to car that could give a great product and perfect fitment on one car, a bad rep by not fitting on another car that is just ever so slightly tweaked. Whether in an accident or not, cars do bend.

and mine is bent to hell

***TitaniumTT*** · 11-19-2009, 11:01 PM

Ah see, they won't fit on your car anyway.... might as well just give them to me

Miata_mx5 · 11-20-2009, 03:34 AM

They are Zinc coated steel.

Yes, you can get them even for similar to GB Pricing on a 1 by 1 basis but they take time still. I have 2 coming for FDs. 1 is sold, the other is up for grabs, first person to send me money + shipping grabs that one.

Check my blog for pictures of the FD one.

I have one for an FD that came in for another customer after 1 month of wait. Going to ship those out soon.

However, if you are in california, you need to pay tax.

WE3RX7 · 11-20-2009, 10:13 AM

So does that mean you can still get them for the FC? How much do I need to send you?

Miata_mx5 · 11-20-2009, 12:14 PM

$210 + PM me Ur ZIPCODE, ill find out the shipping cost.

Max_Spd · 06-15-2010, 08:28 AM

How are we doing on these? im looking for an FD unit!!! I know its been some time now!!!

11-19-2009, 01:24 PM	#31
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Pic-Tease __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-19-2009, 05:40 PM	#34
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Yeah, that whole partner up and start a company has crossed my mind once or twice...... a day. We're a little behind with the planning of the launch, time is just slipping with everything that's been going on but it'll definately happen. If I were to build something like that, I'd do it for myself and then keep the templates and jig the sucker so I could just crank them out if need be. I still prefer to have the car infront of me though. There's so many things that can be just slightly different from car to car that could give a great product and perfect fitment on one car, a bad rep by not fitting on another car that is just ever so slightly tweaked. Whether in an accident or not, cars do bend. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-19-2009, 11:01 PM	#36
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Ah see, they won't fit on your car anyway.... might as well just give them to me __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-20-2009, 03:34 AM	#37
Miata_mx5 Rotary Fan in Training Join Date: Mar 2008 Location: Irvine, Southern California Posts: 99 Rep Power: 18	They are Zinc coated steel. Yes, you can get them even for similar to GB Pricing on a 1 by 1 basis but they take time still. I have 2 coming for FDs. 1 is sold, the other is up for grabs, first person to send me money + shipping grabs that one. Check my blog for pictures of the FD one. I have one for an FD that came in for another customer after 1 month of wait. Going to ship those out soon. However, if you are in california, you need to pay tax. __________________ Endless USA My Livejournal Blog Last edited by Miata_mx5; 11-20-2009 at 03:36 AM.

11-20-2009, 12:14 PM	#39
Miata_mx5 Rotary Fan in Training Join Date: Mar 2008 Location: Irvine, Southern California Posts: 99 Rep Power: 18	$210 + PM me Ur ZIPCODE, ill find out the shipping cost. __________________ Endless USA My Livejournal Blog

11-19-2009, 04:24 PM	#32
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va Posts: 440 Rep Power: 18	I can get a FB clip. I have one here at the house stripped down ready for the crusher I was going to sawzall the front off anyway

11-19-2009, 04:51 PM	#33
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	I missed out on this GB too - just bad timing around the wedding, but definitely still interested in a set. Brian this would be a good product to help launch a company if you were into that sort of thing especially if made for the FC and FB...

11-20-2009, 10:13 AM	#38
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	So does that mean you can still get them for the FC? How much do I need to send you?

06-15-2010, 08:28 AM	#40
Max_Spd The Newbie Join Date: Mar 2008 Posts: 21 Rep Power: 0	How are we doing on these? im looking for an FD unit!!! I know its been some time now!!!