GB:SMB Exhaust Products Introductory GB!! Great Prices & Savings for RCC Members!!

[mdude]

Here are the products that we will be offering for the RX8:



The system SMB has developed for the RX8 is a High flow cat section plus a cat back system.

A metallic substrate cat converter is used in the cat section to allow for even greater flow than the original. Our testing result proved that in this section the optimum pipe dia is 2 3/4" (which is a unique tube dia in stainless available to SMB)

The cat back section comprises of an intermediate tube, plus a rear muffler section, the cat back section utilizes a mixture of tube dia to achieve the desired results.

SMB has achieved a system that gives good increases in rear wheel Kilowatts, a noticeable driving difference through the increase in torque and quicker throttle response. The exhaust note is typical of SMB, i.e. a subtle exhaust note on constant throttle (so no cabin drone) but opens up under load to give you that true sports experience, through the design we managed to minimize the pop back under de-acceleration to an absolute minimum, the heat retained by the rear mufflers is kept to a minimum by the use of SMB's unique packaging material. (so no more smelling melting rear bumpers)

Through out the development process the staff at SMB deliberately did not view any other brands or products for the RX8. Which gave the system we produced a visually unique system, through the placement and angles the mufflers are positioned at.

This system is one of the best designs we have produced.

Here is a video/sound clip of the full exhaust system:




CAT BACK EXHAUST SYSTEM
The cat back section comprises of an intermediate tube, plus a rear muffler section, the cat back section utilizes a mixture of tube dia to achieve the desired results.

SMB has achieved a system that gives good increases in rear wheel Kilowatts, a noticeable driving difference through the increase in torque and quicker throttle response. The exhaust note is typical of SMB, i.e. a subtle exhaust note on constant throttle (so no cabin drone) but opens up under load to give you that true sports experience, through the design SMB managed to minimize the pop back under de-acceleration to an absolute minimum, the heat retained by the rear mufflers is kept to a minimum by the use of SMB's unique packaging material. (so no more smelling melting rear bumpers)

Part Number: CBMR8



METALLIC CONVERTER
A metallic substrate cat converter is used in the cat section to allow for even greater flow than the original. SMB's testing result proved that in this section the optimum pipe dia is 2 3/4" (which is a unique tube dia in stainless available to SMB)

Part Number: MR8HCC




METALLIC CONVERTER FOR FORCED INDUCTION CARS

For this application we use a 5" 200 cell high flow cat with a larger diameter resonator, the pipe work is to suit 3" tube.

Part Number: MR8HCC3




CATLESS MID PIPE FOR FULL RACE APPLICATIONS TO SUIT NORMALLY ASPIRATED VEHICLES

Part Number: MR8CLMP

CATLESS MID PIPE FOR FULL RACE APPLICATIONS TO SUIT FORCED INDUCTION VEHICLES

Part Number: MR8CLMP3

[mdude]

We know that these prices might be alittle higher then previous group buys for SMB Products. Previous sales for SMB products in North America were priced accordingly in order to introduce SMB's Product Line and hopefully obtain feedback from customers. Also contributing to the increase in SMB prices is continuing decline of the US Dollar.



NOW ON TO THE PRICES. PLEASE NOTE THAT THESE PRICES WILL NOT INCLUDE SHIPPING. SHIPPING WILL BE DETERMINED LATER.


FD: If you are using paypal:

1. FULL SYSTEM (3” with metallic cat converter) - FSMRM3 - $1,556.97
2. FULL SYSTEM (with hi flow cat converter) - FSMRH - $1,454.81
3. FULL SYSTEM (3” with metallic cat converter w/muffler) - FSMRM3M - $1,649.76
4. HEADER PIPE (variations) - MRHP353 - $638.15
5. HI FLOW CAT CONVERTER - MRHCC - $367.56
6. METALLIC SUBSTRATE CONVERTER 3” - MRMSC3 - $468.96
7. METALLIC SUBSTRATE CONVERTER WITH MUFFLER 3” - MRMSC3M - $590.88
8. TI TIP CAT-BACK EXHAUST 3” - MRTRM3 - $537.51
9. 4” DOLPHIN-TAIL CAT BACK EXHAUST 3” - MR4RM3 - $569.13
10. TWIN TIP REAR MUFFLER 3” - MROTRM3 - $630.53

RX8:

1. CAT BACK EXHAUST SYSTEM - CBMR8 - $995.83
2. CAT BACK EXHAUST SYSTEM (For 3" version for forced induction cars) - CBMR83 - $1,045.39
3. METALLIC CONVERTER - MR8HCC - $514.63
4. METALLIC CONVERTER (FOR FORCED INDUCTION CARS) - MR8HCC3 - $537.51
5. CATLESS MID PIPE (FOR FULL RACE APPLICATIONS) - MR8CLMP - $147.98
6. CATLESS MID PIPE (FOR FORCE INDUCTION VEHICLES) - MR8CLMP3 - $224.22

FD: If you are using echeck:

1. FULL SYSTEM (3” with metallic cat converter) - FSMRM3 - $1,515.16
2. FULL SYSTEM (with hi flow cat converter) - FSMRH - $1,416.07
3. FULL SYSTEM (3” with metallic cat converter w/muffler) - FSMRM3M - 1605.16
4. HEADER PIPE (variations) - MRHP353 - $623.96
5. HI FLOW CAT CONVERTER - MRHCC - $361.51
6. METALLIC SUBSTRATE CONVERTER 3” - MRMSC3 - $459.86
7. METALLIC SUBSTRATE CONVERTER WITH MUFFLER 3” - MRMSC3M - $578.11
8. TI TIP CAT-BACK EXHAUST 3” - MRTRM3 - $526.35
9. 4” DOLPHIN-TAIL CAT BACK EXHAUST 3” - MR4RM3 - $557.02
10. TWIN TIP REAR MUFFLER 3” - MROTRM3 - $616.57

RX8:

1. CAT BACK EXHAUST SYSTEM - CBMR8 - $970.89
2. CAT BACK EXHAUST SYSTEM (For 3" version for forced induction cars) - CBMR83 - $1,018.96
3. METALLIC CONVERTER - MR8HCC - $504.16
4. METALLIC CONVERTER (FOR FORCED INDUCTION CARS) - MR8HCC3 - $526.35
5. CATLESS MID PIPE (FOR FULL RACE APPLICATIONS) - MR8CLMP - $148.53
6. CATLESS MID PIPE (FOR FORCE INDUCTION VEHICLES) - MR8CLMP3 - $222.48
   

We also offer discounted pricing for 3.5" & 4" exhaust systems, metallic cats, and header pipes. Please pm us for pricing.

Once the Group Buy is over and the order is placed, it will take approximately 4-5 weeks for the products to reach our docks.

Please send payment to sales@jklre.com. Include your forum name, real name, and which part numbers you are purchasing.

If you have any other questions, Please feel free to pm me or Kevin. Thank you.

[mdude]

up.

[EJayCe996]

I just noticed that you guys still left RCC in your introductory title description on the evil forum. They haven't jumped your case with that yet? I actually posted in there thinking I was in RCC even though the layouts are completely different colors

Guess I'll ask my question again here as well. Can this also include their universal things such as their oval resonators?

[mdude]

http://smb.net.au/index.htm

go on the smb website and find the exact part you are looking for. You can jsut pm me the part number so i can get you a price.

[mdude]

We are also offering any part from the Mazda SP car. These parts are carbon fiber and are quite expensive.

http://smb.net.au/mazdarx7zone.htm

[mdude]

We are also offering any part from the Mazda SP car. These parts are carbon fiber.

http://smb.net.au/mazdarx7zone.htm

[EJayCe996]

You guys got a goal date and shipping calculated yet?