J-spec RX7 engine swap

***Herblenny*** · 01-08-2010, 12:50 AM

Quote:

Originally Posted by Zweetz32

if you're gonna use the rhd harness on the lhd car, you're gonna need to do two things. First rewire the x05 on the EM harness to make it fit and match the connector on the front harness. Front harness x05 is 10 pin, jdm x05 harness on EM is 12 pin. Also you need to rewire the harness for the fuel temp sensor or you'll get a CEL.

I can't remember... Are the length the same on both wiring harnesses?

Spooner · 02-09-2010, 11:34 PM

Can you say to me , what color is you hardness plug? beacuse im stock in with my car..i need a wiring diagram of the late hardness that came into FD 96-98 and 99-2002 for the electric installation

I bought a lately J-spec motor and a PowerFC but my car its a 94 FD that brings the yellow/green harness.. so theres a difference between the new and del old harness , any help?

02-09-2010, 11:34 PM	#2
Spooner The Newbie Join Date: Feb 2010 Posts: 1 Rep Power: 0	Can you say to me , what color is you hardness plug? beacuse im stock in with my car..i need a wiring diagram of the late hardness that came into FD 96-98 and 99-2002 for the electric installation I bought a lately J-spec motor and a PowerFC but my car its a 94 FD that brings the yellow/green harness.. so theres a difference between the new and del old harness , any help? Last edited by Spooner; 02-09-2010 at 11:42 PM.