|
|||||||
| Carburetors and Carb Tuning.. All info about old school carb set ups.. |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| Carburetors and Carb Tuning.. All info about old school carb set ups.. |
|
|
|
Thread Tools | Display Modes |
|
|
01-26-2010, 09:32 PM
|
#1 | |
|
Custom User Title
Join Date: Feb 2008
Location: Seattle, WA / Pullman, WA
Posts: 350
Rep Power: 18  |
Holley double-pumpers and Weber DCOEs are good candidates for blow-through. There's very little involved in boost-prepping a DCOE; as I understand it, use a neoprene float bowl gasket and teflon-tape anything threaded (save the idle mixture screws, obviously), and you're good to go. I hear Weber IDAs can be done without much trouble, either, but I don't know any specifics as to what's required.
The original site is down, but there's a writeup on boost-prepping a Holley here: http://web.archive.org/web/200805050.../blowthru.html Other than that, it's just a matter of building a carb hat and tuning it.
__________________
Quote:
Last edited by PercentSevenC; 01-26-2010 at 09:43 PM. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
