FS: Greddy SMIC w/ 3 piece piping, Fluidyne radiator, Greddy intake, and other parts.

RATED RX-7 · 01-28-2010, 04:42 AM

I am parting out a few things that I no longer have use for, most parts are in mint condition. Here is the list and prices, prices are OBO+SHIPPING.......

Apex'i power fc w/comander and holder - $850

Greddy SMIC w/3 piece polished piping and all greedy couplings - $800

Efini polished cross pipe - $180

Greddy front strut tower bar - $100

Greddy airinx intake w/filters and couplings - $180

Fluidyne radiator (NO LEAKS) - $200

Set of two brand new never used still in bag's 850cc injectors from RP - $200

SX FPR - $120

AST Polished Air Separator Tank - $150

The FPR, the Y pipe and the air separator tank are still on the motor, if any one is interested in those I will take them off.......

Pic's......

I also have my motor up for sale w/tranny, the motor was checked out by MAZMAX and it need's a corner seal but the motor does turn on so it's a running motor. This is what the motor has.....

3mm apex seals
Street port
8 piece block off plate kit from RP
Polished alt.
Greddy pulley kit
Greddy coolant cap and oil filler cap
Polished intake manifold & TB
Polished coolant filler tank
Stock turbos with about 55k miles on them minimal shaft play but still in good condition.

And as for the tranny all it has is a BONZE Street Comp Clutch w/pressure plate.

I am asking $1800 OBO for it....

RATED RX-7 · 01-28-2010, 10:40 PM

I also have a full Apex'i Dual N1 Exhaust will come with dp,mp,cb, for $500. I'll post some pictures up ASAP.

RATED RX-7 · 01-30-2010, 05:05 PM

New price on motor $1600 obo.....

RATED RX-7 · 01-31-2010, 03:09 AM

3 piece piping - SOLD

Greddy intake - SOLD

Fluidyne Radiator - SOLD

Greddy pully kit - SOLD

Everything else is still up for grabs......

RATED RX-7 · 01-31-2010, 03:15 AM

ALL PRICES ARE OBO+SHIPPING......

Apex'i power fc w/comander and holder - $850

Greddy SMIC - $700

Efini Y pipe w/ polished cross pipe - $180

Greddy front strut tower bar - $100

Set of two brand new never used still in bag's 850cc injectors from RP - $200

SX FPR - $120

AST Polished Air Separator Tank - $150

Motor - $1600

The FPR, the Y pipe, air separator tank and Apex'i exhuast are still on the motor, if any one is interested in any of those I will take them off.......

MADDSLOW · 01-31-2010, 06:12 AM

Any chance you're willing to sell that alternator?

OPTIONS · 01-31-2010, 12:51 PM

bump for a great seller!!! seen the motor in prson, its very nice, esp with all the polished parts! GREAT PRICES!

RATED RX-7 · 02-02-2010, 09:05 PM

3 piece piping - SOLD

Greddy intake - SOLD

Fluidyne Radiator - SOLD

Greddy pully kit - SOLD

AST - SOLD

Apex'i PFC - SOLD

ALT - SOLD

RATED RX-7 · 02-02-2010, 09:10 PM

ALL PRICES ARE OBO+SHIPPING......

Greddy SMIC - $700

Efini Y pipe w/ polished cross pipe - $180

Greddy front strut tower bar - $100

Set of two brand new never used still in bag's 850cc injectors from RP - $200

SX FPR - $120

Motor - $1600

The FPR, and the Y pipe are still on the motor, if any one is interested in any of these I will take them off.......

RATED RX-7 · 02-03-2010, 06:12 PM

Here are the pictures of the exhaust any questions feel free to ask.....

RATED RX-7 · 02-04-2010, 08:16 PM

ALL PRICES ARE OBO+SHIPPING......

Greddy SMIC - $700

Efini Y pipe w/ polished cross pipe - $180

Greddy front strut tower bar - $100

Set of two brand new never used still in bag's 850cc injectors from RP - $200

SX FPR - $120

Motor - $1600

Alternator back up for sale - $140

RATED RX-7 · 02-07-2010, 09:22 PM

Y pipe and strut bar pending for tomorrow.....

RATED RX-7 · 02-08-2010, 07:21 PM

ALL PRICES ARE OBO+SHIPPING......
Greddy SMIC - $700
Set of two brand new never used still in bag's 850cc injectors from RP - $200
SX FPR - $120
Motor - $1600
Alternator back up for sale - $140
This is what the motor looks now with out the alt. pulley's and Y pipe.

And a few pic's of the FPR.....

RATED RX-7 · 02-11-2010, 07:02 PM

Mods please close this thread, thanks.....

01-28-2010, 04:42 AM	#1
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	FS: Greddy SMIC w/ 3 piece piping, Fluidyne radiator, Greddy intake, and other parts. I am parting out a few things that I no longer have use for, most parts are in mint condition. Here is the list and prices, prices are OBO+SHIPPING....... Apex'i power fc w/comander and holder - $850 Greddy SMIC w/3 piece polished piping and all greedy couplings - $800 Efini polished cross pipe - $180 Greddy front strut tower bar - $100 Greddy airinx intake w/filters and couplings - $180 Fluidyne radiator (NO LEAKS) - $200 Set of two brand new never used still in bag's 850cc injectors from RP - $200 SX FPR - $120 AST Polished Air Separator Tank - $150 The FPR, the Y pipe and the air separator tank are still on the motor, if any one is interested in those I will take them off....... Pic's...... I also have my motor up for sale w/tranny, the motor was checked out by MAZMAX and it need's a corner seal but the motor does turn on so it's a running motor. This is what the motor has..... 3mm apex seals Street port 8 piece block off plate kit from RP Polished alt. Greddy pulley kit Greddy coolant cap and oil filler cap Polished intake manifold & TB Polished coolant filler tank Stock turbos with about 55k miles on them minimal shaft play but still in good condition. And as for the tranny all it has is a BONZE Street Comp Clutch w/pressure plate. I am asking $1800 OBO for it....

01-31-2010, 03:15 AM	#5
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	ALL PRICES ARE OBO+SHIPPING...... Apex'i power fc w/comander and holder - $850 Greddy SMIC - $700 Efini Y pipe w/ polished cross pipe - $180 Greddy front strut tower bar - $100 Set of two brand new never used still in bag's 850cc injectors from RP - $200 SX FPR - $120 AST Polished Air Separator Tank - $150 Motor - $1600 The FPR, the Y pipe, air separator tank and Apex'i exhuast are still on the motor, if any one is interested in any of those I will take them off....... Last edited by RATED RX-7; 01-31-2010 at 03:25 AM.

02-02-2010, 09:05 PM	#8
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	3 piece piping - SOLD Greddy intake - SOLD Fluidyne Radiator - SOLD Greddy pully kit - SOLD AST - SOLD Apex'i PFC - SOLD ALT - SOLD Last edited by RATED RX-7; 02-02-2010 at 09:15 PM.

01-28-2010, 10:40 PM	#2
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	I also have a full Apex'i Dual N1 Exhaust will come with dp,mp,cb, for $500. I'll post some pictures up ASAP.

01-30-2010, 05:05 PM	#3
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	New price on motor $1600 obo.....

01-31-2010, 03:09 AM	#4
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	3 piece piping - SOLD Greddy intake - SOLD Fluidyne Radiator - SOLD Greddy pully kit - SOLD Everything else is still up for grabs......

01-31-2010, 06:12 AM	#6
MADDSLOW The Newbie Join Date: Feb 2008 Posts: 18 Rep Power: 0	Any chance you're willing to sell that alternator?

01-31-2010, 12:51 PM	#7
OPTIONS Guest Join Date: Mar 2008 Posts: 17 Rep Power: 0	*bump for a great seller!!! seen the motor in prson, its very nice, esp with all the polished parts! GREAT PRICES!*

02-02-2010, 09:10 PM	#9
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	ALL PRICES ARE OBO+SHIPPING...... Greddy SMIC - $700 Efini Y pipe w/ polished cross pipe - $180 Greddy front strut tower bar - $100 Set of two brand new never used still in bag's 850cc injectors from RP - $200 SX FPR - $120 Motor - $1600 The FPR, and the Y pipe are still on the motor, if any one is interested in any of these I will take them off.......

02-03-2010, 06:12 PM	#10
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	Here are the pictures of the exhaust any questions feel free to ask.....

02-04-2010, 08:16 PM	#11
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	ALL PRICES ARE OBO+SHIPPING...... Greddy SMIC - $700 Efini Y pipe w/ polished cross pipe - $180 Greddy front strut tower bar - $100 Set of two brand new never used still in bag's 850cc injectors from RP - $200 SX FPR - $120 Motor - $1600 Alternator back up for sale - $140

02-07-2010, 09:22 PM	#12
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	Y pipe and strut bar pending for tomorrow.....

02-08-2010, 07:21 PM	#13
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	ALL PRICES ARE OBO+SHIPPING...... Greddy SMIC - $700 Set of two brand new never used still in bag's 850cc injectors from RP - $200 SX FPR - $120 Motor - $1600 Alternator back up for sale - $140 This is what the motor looks now with out the alt. pulley's and Y pipe. And a few pic's of the FPR.....

02-11-2010, 07:02 PM	#14
RATED RX-7 SUNRISE Join Date: Feb 2008 Location: Houston Tx. Posts: 103 Rep Power: 18	Mods please close this thread, thanks.....