couple ?'s about engine and tranny removal

Signal 2 · 02-23-2010, 06:23 AM

MUCH easier with a leveler on the engine hoist and a decent floor-jack.
Consider getting this video as a primer. It should help give you both an idea of what's required.
http://www.rotaryaviation.com/R%20R%20Video.htm
Another source of info about engine removal:
http://www.rotaryresurrection.com/3r...eng_remov.html

There are no special tools needed to remove the engine. But at times it is easier to remove things like the PS pulley bolt when you have air tools (impact wrench).
First timers also usually stuggle with the pull-type clutch. Here is a short video that also shows how to disconnect it.
http://video.google.com/videoplay?do...8290919&hl=en#

I second getting the FSM.

02-23-2010, 06:23 AM	#1
Signal 2 Viable Fossil Join Date: Mar 2008 Location: Mid-West Posts: 199 Rep Power: 18	MUCH easier with a leveler on the engine hoist and a decent floor-jack. Consider getting this video as a primer. It should help give you both an idea of what's required. http://www.rotaryaviation.com/R%20R%20Video.htm Another source of info about engine removal: http://www.rotaryresurrection.com/3r...eng_remov.html There are no special tools needed to *remove* the engine. But at times it is easier to remove things like the PS pulley bolt when you have air tools (impact wrench). First timers also usually stuggle with the pull-type clutch. Here is a short video that also shows how to disconnect it. http://video.google.com/videoplay?do...8290919&hl=en# I second getting the FSM. __________________ Jim VR R1 FD Last edited by Signal 2; 02-23-2010 at 06:25 AM.