RX-8 will not turn over, no power-steering...

Rotary Inspired · 03-22-2010, 10:52 PM

or you can go the easy way.

Remove the vacume box like thing behind the MAF held on w/ a worm clamp. Spray carb cleaner in there. Replace the vacume box back. Pull fuel pump fuse. Go start the car. It will start. After it starts jump out and place the fuel pump fuse back in. She will stay running.

After i fouled the plugs once and had to remove the stupid front tire to get to them i said screw that. I found an easier way. Works like a charm.

Make sure the car is in nuetral when you start it so you can jump out. or get the assistance of a friend.

03-22-2010, 10:52 PM	#8
Rotary Inspired Rotary Fan in Training Join Date: Feb 2008 Location: SW OKC Posts: 75 Rep Power: 18	or you can go the easy way. Remove the vacume box like thing behind the MAF held on w/ a worm clamp. Spray carb cleaner in there. Replace the vacume box back. Pull fuel pump fuse. Go start the car. It will start. After it starts jump out and place the fuel pump fuse back in. She will stay running. After i fouled the plugs once and had to remove the stupid front tire to get to them i said screw that. I found an easier way. Works like a charm. Make sure the car is in nuetral when you start it so you can jump out. or get the assistance of a friend. __________________ If you wanna become ASE certified buy the RX7.