rx2 sway bar

sen2two · 04-01-2010, 07:20 PM

So i have a few ideas, but im semi-new to building custom suspension. And imm not sure what would work. Especially when it comes to the old school 1985 and older rx7 type suspensions...

bwaits · 04-04-2010, 07:51 AM

Many of the "tub" GT cars and E-Prod Rx3s I have seen added stay rods like those used on the first gen suspension. This eliminated the sway bar as a locating member, allowing tubular, aluminum arm style sway bars to be used.

I know the car you have. I would tube from the firewall forward using the frame rails just before the sway bar mounts. Then use "A Arm" lower control arms with custom pick up points. Since it is a drag car nailing the front suspension geometry will be fairly straight forward.

-billy

04-01-2010, 07:20 PM	#1
sen2two KTEC Join Date: Jan 2009 Posts: 642 Rep Power: 0	So i have a few ideas, but im semi-new to building custom suspension. And imm not sure what would work. Especially when it comes to the old school 1985 and older rx7 type suspensions... __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

04-04-2010, 07:51 AM	#2
bwaits Talk - Action = Nothing Join Date: Feb 2008 Posts: 166 Rep Power: 18	Many of the "tub" GT cars and E-Prod Rx3s I have seen added stay rods like those used on the first gen suspension. This eliminated the sway bar as a locating member, allowing tubular, aluminum arm style sway bars to be used. I know the car you have. I would tube from the firewall forward using the frame rails just before the sway bar mounts. Then use "A Arm" lower control arms with custom pick up points. Since it is a drag car nailing the front suspension geometry will be fairly straight forward. -billy __________________