rx2 sway bar

bwaits · 04-07-2010, 03:30 PM

I am glad you are coming to that solution. You will be happier in the long run.

You can also still use FC suspension bits. Weld the upper strut mount a few inched lower than stock and the shorter strut will not be a problem. A pair of tubular lower A arms using the FC lower ball joint would be a piece of cake. Simple plate style engine mount, if done correctly it could serve the mount the rack as well.

Could be a sick car.

-billy

04-07-2010, 03:30 PM	#1
bwaits Talk - Action = Nothing Join Date: Feb 2008 Posts: 166 Rep Power: 18	I am glad you are coming to that solution. You will be happier in the long run. You can also still use FC suspension bits. Weld the upper strut mount a few inched lower than stock and the shorter strut will not be a problem. A pair of tubular lower A arms using the FC lower ball joint would be a piece of cake. Simple plate style engine mount, if done correctly it could serve the mount the rack as well. Could be a sick car. -billy