I made it home from DGRRX safely but...

g's 3rd gen · 04-19-2010, 09:14 AM

1 ignition switch and needs a good harness side connector now after the 12+ pin rattled loose half way home . I did a full 2nd gear high boost pull on the on ramp after eating lunch and BOOM! Thought the engine grenaded.Thankfully I noticed the symptoms and traced back to the switch and put a new spade connector in the haness side to get home. 1 thermostat on the dragon friday. Other than that ok. Rich made it to scrub's house (Dan) in Delaware and is heading to the shop right now. Had a great time! G

04-19-2010, 09:14 AM	#1
g's 3rd gen Rotary Fan in Training Join Date: Feb 2008 Posts: 43 Rep Power: 0	1 ignition switch and needs a good harness side connector now after the 12+ pin rattled loose half way home . I did a full 2nd gear high boost pull on the on ramp after eating lunch and BOOM! Thought the engine grenaded.Thankfully I noticed the symptoms and traced back to the switch and put a new spade connector in the haness side to get home. 1 thermostat on the dragon friday. Other than that ok. Rich made it to scrub's house (Dan) in Delaware and is heading to the shop right now. Had a great time! G __________________ 1993 FD3S base, SSM, 99 spec, A-spec t4 35r. 420 on pump gas