Sometimes you just have to know when to start over...

[WE3RX7]

I have never had that much trouble getting brake rotors off my FC, or any vehicle for that matter, lol... WTF. Was it just that corroded? I mean, the hubs are AL so to prevent this reason of rusting solid on the rotor... I've had to use an air hammer and some deep creep but thats about it...

Although, I just saw your in Ontario. Corrosion there must be much worse

[Nismo]

Originally Posted by WE3RX7

I have never had that much trouble getting brake rotors off my FC, or any vehicle for that matter, lol... WTF. Was it just that corroded? I mean, the hubs are AL so to prevent this reason of rusting solid on the rotor... I've had to use an air hammer and some deep creep but thats about it...

Although, I just saw your in Ontario. Corrosion there must be much worse

I have never had an easy time, the car has 75k miles, so they could be the originals. Also when you put two disimilar metals together you are going to get corrosion like that, specially with heat cycling like you see on a brake rotor.