Stalling when reaching boost or 0 vacuum

[Gregory Casimir]

so the way you have it set up then is the correct way? I should be finishing up my swap this week or so. I really would like your help on this!

[LunchboxCritter]

Originally Posted by Gregory Casimir

so the way you have it set up then is the correct way? I should be finishing up my swap this week or so. I really would like your help on this!

I do not know for sure if it's the correct way or not. My car is running great, boosting at 9 psi, idling at 800 rpm, and holds 18 psi of vaccum at idle. This vaccum diagram is how I currently have my vaccum and emissions stuff ran. Hard to tell from the diagram but I have the one way check valve on the charcoal canister so it can only pull the fumes into the intake hose, rather than blowing air into the charcoal canister. If I can be of any help just let me know.