20b/13b-re mount plans for FC

[Revelc]

Ah! You mean like this? http://www.rx7club.com/showthread.ph...ghlight=oilpan

[TitaniumTT]

Originally Posted by Revelc

DIY != low buck by any means, especially when you have more tools at your disposal than a dremel. Yes, the twins are already changed to non-sequential, and the TII drive train will be fine for the time being.

I do everything myself and I don't consider it low buck. There's DIY, and there's ghetto, and there's bought not built.

Originally Posted by Revelc

If you've got details on the spacer, by all means show me some pics or drawings and I'll fab one right up.

Think 1 1/4" AL bar stock drilled out and countersunk to bolt to the framerails, then two holes tapped ~1" farther forward to bolt the swaw bar mounts to. The LS1 guys use them, Granny's makes them I think.

Originally Posted by Revelc

EDIT: All the new oil pan setups I've seen are for dry sumps, which is a far more expensive ordeal than a new sway bar. Again if you've got drawings/pics let me know and I'll be more than happy to make one. The purpose of this thread was to find out what plans were in the public arena before I went reinventing things.

Build your own pan from AL, I thought that was clear. I never said anything about dry-sump

Originally Posted by project86

not speaking from experience here cause i obviously havent done anything yet... but it seems that making spacer for the sway bar should be a pretty straight forward affair. Oilpan on the other hand does not sound so easy.. but if your name is Brian... and youre half robot hahaa.....

Originally Posted by Revelc

Ah! You mean like this? http://www.rx7club.com/showthread.ph...ghlight=oilpan

do me a favor please and img blah blah blah /img tag it for me.... I'm banned again

[Revelc]

Originally Posted by TitaniumTT

do me a favor please and img blah blah blah /img tag it for me.... I'm banned again

Heh




stock




At the end of that thread patman gives his blessing for people to copy it, so I've sent him a PM.

On the topic of the oil pan, I read that as 1 1/4" because I'm retarded. Either way moving the sway bar forward is a much better solution for the time being.

That's what was in my head when you said new oil pan.