Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild

[TitaniumTT]

My car is a prissy little attention WHORE! and now with a fucked rear end...... so if anyone has a 4.11 ring and pinion kicking around... I need one. Car goes nowhere till I can get one.

[project86]

Originally Posted by TitaniumTT

My car is a prissy little attention WHORE! and now with a fucked rear end...... so if anyone has a 4.11 ring and pinion kicking around... I need one. Car goes nowhere till I can get one.

well if you would quit touching it in all the right ways maybe your prissy attention whore would learn to behave herself

[vex]

Originally Posted by TitaniumTT

My car is a prissy little attention WHORE! and now with a fucked rear end...... so if anyone has a 4.11 ring and pinion kicking around... I need one. Car goes nowhere till I can get one.

Sorry... I couldn't help myself. She was bending over and not wearing any panties... so I did what any normal man would do. I piidb.

[TitaniumTT]

Originally Posted by project86

well if you would quit touching it in all the right ways maybe your prissy attention whore would learn to behave herself

She does need a spanking. Although first with the nice weather, a day off, and some time to think I'll be heading outside to wash, compound, glaze and wax her. Naughty girl

Originally Posted by jtbshaw

Hmmm, that fuel cell looks very familiar. Wonder where you got that idea.

Yup yup, those 2" AL tubes that I stole from you worked out perfectly. I mounted them so they wedge in between the mounting "blocks" that the factory straps mount to. I had to build my own straps with a little padding and the fit is so snug that I can jam the thing in place and it stays without the straps. Pretty cool. A few days ago I went and looked for your pics, they're moved....

Originally Posted by jtbshaw

Seriously, it looks good B. My TII finally arrives tomorrow, so, hopefully, my son and I can get this thing finished up soon.

Keep up the good work.

Todd B.

Nice, that should be a badass ride when it's done. Good luck Todd.

I need to take a few more measurements in the next few days and send you a few files. It's time to nail down these rear trigger wheels and get them off to you for some cutting and plating.

Originally Posted by helghast7

yea it seems that way, though next big set of mods i do ill probably upgrade my secondaries and fuel pump anyways, just to have a little more cushion...gona talk to dave about those 2k injectors on the pfc

If it ain't broke, don't fix it. Although I will say that the idle is SUPERB with the new ID injectors....... I couldn't believe it. Perfect 950rpm, I love 'em thus far. Oh, and there was alot of bitching towards me over on the evil forum about never being able to get the transition right... Idiots, all of them. Didn't even need to adjust anything after I reconfigured the MoTeC for the different sized injectors. What a bunch of keyboard mechanics.

Originally Posted by helghast7

yea no kidding, its one of the reasons why most people have cars that are just like everyone elses, hard to be unique when your telling yourself it cant be done all the time

Exactely. Anything can be done, well almost anything.

Originally Posted by helghast7

im always down for trying something custom on my car

oh yea definetly, i know how busy you are, plus i definetly dont want to put my FD to sleep when i just got the damn thing running great! lol....and...i need to save up monies anyways ....and get a beater....

but yea i definetly want to do it, especially since it shouldnt be all that hard....the majority of the work i did already from installing the setup i have now. so theres plenty of room to play with

Ah, I thought you were talking VMIC

Originally Posted by helghast7

oh yea i defintly know that, especially from my first set....and then talking with Dave...he tempted me but i resisted....especially after he told me how long they lasted when he upped them to 17psi for another customer....which was all of 3 months

Yeah, I tend to drive around @ 10psi and then up it when it's time to play. I've got that little trim knob to go from 10-15psi in 9 equal increments. Pretty badass.

Originally Posted by helghast7

this reminds me, that i still have to post up the dyno sheets...and pics dennis took of me when we were driving down to rotormania... we rolled in so hard core we had our own camera car lmao!

Nice, I need a new ring and pinion so I can start playing.

Originally Posted by vex

Sorry... I couldn't help myself. She was bending over and not wearing any panties... so I did what any normal man would do. I piidb.

Can't blame ya.

[TitaniumTT]

Fuel cell is obviously done and installed and as far as I can tell, working just great so I thought I'd share the last few pics of this nightmarish RE-REbuild... that's well, not entirely finished just yet. Problems from the first few miles are as follows
Rear end is fragged
The front right ABS knuckle that I picked up is out of shape and causing the rotor to contact the caliper. Yes, that is accurate. I though after I put everything back together that it was a frozen caliper becuase it wouldn't turn. So I bought a new caliper, bled it and the problem was still there. WTF? Fuck it, maybe with some heat she'll loosen up. What a fucking NOISE! Investigated and found the problem. Chewed into the caliper by ~.05". I removed the shim so it would work but still need a new knuckle. Bill's getting a PM shortly.
T/O bearing making some noise - not so concerend because I still need to get that 6-spd in.
Front heat shield for the cell.
better install on the Alpine PDX-5
New battery. I'm starting to hate Optima batteries.

So, onto the last few set's of pics.

I decided to be a baller and get some Mil-Spec fuel cell bulkhead connectors. in hindsight, they're dead sexy, but very pricey. Whatever. I got a tip from the engineers @ MoTeC - Crimp the wires, solder the terminals - cool The terminals are rated @ 13A. That's about what these pumps draw so I decided to double up on them. THe white and 3rd black wire run to a MetriPack connector so I can measure fuel pump voltage AT the pump while running. Pretty badass I think.



Completed pic of the Bosch pump. It's still loud, but I can live with it....... for now.



Completed pic of Denso pump, still quite, still love it.



Look at that heatshrink. WTF is wrong with Raychem, that'll never fit right. BASTARDS!!!!!!!!



oh wait - nmd - I still love those guys

[TitaniumTT]

The completed cell. Just need to get some connectors on the end of the harness and she be done.



Filler. filler vent, rollover/atmosphere vent



Access to denso pump. I wasn't about to cut into the floor pan, in hindsight I should've, and if I find myself needing access to the Bosch pump or the sender I probably will. but for now, negatory.



I still need a few pics of the underside Looks pretty cool from the back

[WE3RX7]

Originally Posted by TitaniumTT

Bill's getting a PM shortly.

Replying shortly....

Originally Posted by TitaniumTT

New battery. I'm starting to hate Optima batteries.

Finally, my band-wagon is getting heavy. I have found optima batteries to be a huge PIA. I actually use Exide gel cells now... heavy, but affective.