In Chamber Testing - Rotary Car Club

Barry Bordes In Chamber Testing 07-04-2010, 03:32 PM

Barry Bordes The test equipment is made by... 07-04-2010, 03:36 PM

Barry Bordes More interpretation. The red... 07-04-2010, 03:37 PM

Barry Bordes Just roughly looking at this... 07-04-2010, 03:38 PM

Barry Bordes http://i287.photobucket.com/al... 07-04-2010, 03:40 PM

RETed Wow, I dunno how I missed... 07-08-2010, 07:08 AM

RICE RACING Can you please show me where... 07-08-2010, 07:50 AM

Barry Bordes Peter, my EGTs are 2” from... 07-10-2010, 08:35 PM

More replies below current depth...

Barry Bordes Ted, The sensor is a... 07-10-2010, 05:57 PM

TitaniumTT First time seeing this as... 07-08-2010, 08:01 AM

Barry Bordes Titanium, My understanding... 07-10-2010, 08:51 PM

vex If I had to guess the... 07-08-2010, 09:56 AM

RETed You'd think this would be an... 07-08-2010, 11:36 AM

Silver86 wish i could see the pictures... 07-08-2010, 11:57 AM

vex My thoughts exactly. IT's a... 07-08-2010, 01:35 PM

classicauto Yes if memory serves, Barry's... 07-09-2010, 12:59 PM

Barry Bordes Vex Ted and Classicauto. Not... 07-11-2010, 07:11 AM

TitaniumTT Agreed.... 100% agreed ... 07-11-2010, 10:14 AM

dudemaaan Interesting thread, subscribed 07-09-2010, 02:17 PM

Herblenny Awesome! Thanks for... 07-09-2010, 02:26 PM

NoDOHC I agree that your low... 07-09-2010, 06:11 PM

RICE RACING I asked them for a cycle to... 07-09-2010, 07:04 PM

Barry Bordes Barry 07-11-2010, 07:49 AM

RETed Do those combination spark... 07-10-2010, 10:27 AM

RICE RACING I sent the company who makes... 07-10-2010, 06:06 PM

RICE RACING Barry how much are TFX... 07-10-2010, 06:23 PM

Barry Bordes Barry 07-11-2010, 07:40 AM

NoDOHC The awesomeness of pressure... 07-09-2010, 08:47 PM

RICE RACING This is what I use >... 07-09-2010, 09:21 PM

C. Ludwig Why are you guys assuming... 07-10-2010, 08:50 AM

RICE RACING Um you realize a bespoke... 07-10-2010, 09:47 AM

C. Ludwig Um, I guess you realize... 07-10-2010, 10:16 PM

RICE RACING I will discuss with Barry. 07-11-2010, 12:32 AM

NoDOHC Sorry about the confusion, I... 07-11-2010, 07:53 PM

Barry Bordes NoDOHC, I think flame speed... 07-12-2010, 07:13 AM

vex Barry do you know your %error... 07-12-2010, 05:36 AM

Barry Bordes The sensor specs are ±1% for... 07-12-2010, 09:40 AM

vex By sensor specs for... 07-14-2010, 10:17 AM

Barry Bordes Vex, check out this info, ... 07-14-2010, 05:27 PM

NoDOHC Correct me if I am completely... 07-12-2010, 09:20 PM

Barry Bordes NoDOHC, thanks for the input.... 07-13-2010, 09:32 AM

NoDOHC Shaft degrees makes more... 07-13-2010, 10:11 PM

vex Oh believe me I know about... 07-14-2010, 07:00 PM

Barry Bordes Barry 07-15-2010, 02:10 PM

vex Windowing occurs when you... 07-15-2010, 03:36 PM

Barry Bordes Vex, I believe the program... 07-16-2010, 07:35 AM

scotty305 I don't mean to be contrary,... 07-18-2010, 05:02 PM

vex You're right. I forgot the... 07-19-2010, 09:47 AM

Barry Bordes This is the way we can get... 07-25-2010, 12:25 PM

Barry Bordes Good news and bad news. ... 08-05-2010, 10:30 AM

NoDOHC The curve is ugly, but I like... 08-05-2010, 09:45 PM

Barry Bordes Notice that this is not the... 08-06-2010, 06:30 AM

NoDOHC I thought that the hand-drawn... 08-08-2010, 03:48 AM

Barry Bordes http://i287.photobucket.com/al... 08-08-2010, 08:16 AM

NoDOHC Peak pressure still at 38... 08-08-2010, 02:45 PM

Barry Bordes Barry 08-08-2010, 09:39 PM

NoDOHC You could be right. I am not... 08-10-2010, 06:12 AM

Libor Bump this up. Barry, are... 06-04-2011, 08:50 PM

Barry Bordes Libor and DOHC, You know how... 06-05-2011, 08:16 AM

Libor Exactly. I´ve been lately... 06-05-2011, 08:36 AM

Barry Bordes http://i287.photobucket.com/al... 06-05-2011, 01:15 PM

08-08-2010, 03:48 AM	#1
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 17	I thought that the hand-drawn pressure curves above corresponded to the burn curve below. I didn't intend to add confusion Could you show the pressure curve for burn initiation @ 28 BTDC? __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)