|
|||||||
| Carburetors and Carb Tuning.. All info about old school carb set ups.. |
|
|
Thread Tools | Display Modes |
|
|||||||
| Carburetors and Carb Tuning.. All info about old school carb set ups.. |
|
|
Thread Tools | Display Modes |
09-08-2010, 05:02 PM
|
#6 |
|
I've been Wankeled!
Join Date: Apr 2010
Location: Mildmay, Ontario, Canada
Posts: 260
Rep Power: 16  |
I know at anything over 3psi on my 48 IDF i had problems with fuel being pushed past the needle and seat and also external fuel leaks from the carb. Keep the pressure low, but go with a larger needle and seat along with a high flow pump. I'm running a 3mm needle and seat on my halfbridge in my Rx-4.
__________________
1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place |
|
|
| Bookmarks |
|
|
Threaded Mode